C. Crane A-66 manual Payout Unit, Product Labels, Tube Cassette

DESIGN Optipay™CC Section3

Product Labels

The Coin Validator’s Side Product Label

((See Figure 3-1 [11] and Figure 3-4) contains all the device defining data, such as the device type and series, and the data programmed according to customer specifications such as their currency and relative country’s coin type requirements listed in Table 3-1.

Figure 3-4Coin Validator Side Label

Table 3-1Side Label Features

1.Data block number 2. Order number (6 digit)

3.Device part number 4. Serial device number per order number (3 digit)

5.	Barcode	6.	Certified European
			mark
7.	Date of	8.	Nominal Voltage
	manufacture (4
	digit)
9.	Ordering code	10.	Product Trade
	(8 digit)		Marked name

The Front Product Label (See Figure 3-1 [5] and Figure 3-5) contains similar information as the side label with additional content regarding safety and relative country’s coin age denomination require-

ments listed in Table 3-2.

Figure 3-5Coin Validator Front Label

Table 3-2Front Label Features

1.	Country flag,	2.	Order number
	country code and		(6 digit)
	currency/coin type
	requirements
3.	Nominal voltage &	4.	Serial device
	Interface		number per order
			number (3 digit)
5.	Product name	6.	Safety tested
			certification logo
7.	Barcode	8.	Certified European
			mark
9.	Date of	10.	Data block number
	manufacture (4
	digit)

11.Ordering code 12. Device part number (8 digit)

The Payout Unit

The Payout Unit consists of the four tube cassette and the payout set. The device is equipped with filling level sensors and tube counters to monitor each tube cassette’s inventory.

Tube Cassette

The Tube Cassette (See Figure 3-1 [6] and Figure 3-6 [1]) incorporates four change tubes with different diameters for collecting four user coin types, available for vending to a customer. A sticker located at the top of the Tube Cassette iden- tifies which tube accepts a particular denomination coin value.

The tube coin storage capacity depends on the thickness of each coin type (example: approxi- mately 87 U.S. 25¢ coins can fill a tube), See Table 3-3 for a listing of the U.S. coin values and quanti- ties allowed per tube.

Table 3-3U.S. Coin Cassette Capacity

Coin	Thick	No. of Coins	Empty	@	@
Value	-ness	@ 100%		50%	75%
	(cm)	Sensor Level
0.5	1.87	78	10	39	59
0.10	1.3	112	14	56	85
0.25	1.67	87	11	44	66
1.00	2.0	73	9	36	55

The Coin Validator tests whether an accepted coin should be sorted into one of the four tubes, or be directed to the Cash Box according to customer programming.

5900335 © 2005 JCM-American Corporation

3 - 3