Set functions listed in -5 a through h

Section 12

Optipay™CC

PALM PILOT® USAGE

a
b
c
d
e
f
g
h
j	i

Figure 12-5Operating Modes

4.Set functions listed in Figure 12-5 “a” through “h”.

Select the desired settings and click Send (See Figure 12-5 i) to program the Coin Changer or Cancel (See Figure 12-5 j) to return to the Settings screen.

a). Inventory check box functions are:

•Blocked – Inventory keypad is disabled

•Enabled by machine control –

Inventory keypad can be enabled by the Vending Machine. This requires a service pass code

•Enabled – Inventory keypad enabled

b). Payout security stock allowed – Check to enable the machine to pay the entire contents of the change tubes.

c). Accumulate credit – Low value coins are inserted until a credit value is reached. The Coin Changer then sends the value to the VMC.

d). Float up function on – Enable to allow float up levels. Coin “float” values are set on the “Coin Settings” page.

e). With high string protection – Enabling high string protection will cause the Coin Changer to send the next 100 coins to the cashbox if the string sensor is triggered.

f). Tube Counter with security stock – Check Tube Counter’s security stock, including the security stock values, to transmit tube contents to the VMC.

g). No correction of tube counters – to disable the automatic Coin Changer Coin Tube Sensors.

m). “Tube empty” function for bills – Check this function to disable acceptance of high value bills when the Coin Changer is empty.

5.Select Inhibit Mask… on the screen to enable or disable coin/bill acceptance (See Figure 12-6 a).

a). Select the tick box next to each denomin- ation that is to be disabled (See Figure 12- 6 b).

Figure 12-6Inhibit Coin Channels Mode

b). Select to program the Coin

Changer or to return to the

screen (See Figure 12-6 c). 6. Setting the Changer’s “Float Level”.

a). Configure the “Float Level” for each coin denomination by using the triangular “up” and “down” pointing arrows on the screen (See Figure 12-7 a).

b). Click to program the Coin Changer (See Figure 12-7 b).

Figure 12-7Float Level Mode

1 2 - 2