You will then see a dialog displaying the telephone number being dialed, as shown below.
View the number that is being dialed.
To end a call, press the clipOn’s key again, press the phone’s End key, or close the phone.
Using Contacts
Using Contacts, you can view and create contact information such as names, phone numbers, and addresses.
You can also make telephone calls quickly and easily, as described in “Calling with the StarTAC clipOn” on page 9. To enter the Contacts module from the Home screen, highlight the
Contacts icon, and press .
Changing views
You will see either a category name or “All Cards” at the top right of the screen. “All Cards” means that you are viewing all the categories in your clipOn. If you have only one cardfile category (or no categories), “All Cards” will not appear.
Now you can:
ãScroll through the alphabetical tabs with or .
Go to a specific lettered tab by pressing , and then using
or . You can view a specific card by pressing ,
and then using or . Press again to view the
details, and to switch among the address, number, and note views of the card (the Contact information determines
which views are available). The selected view is indicated
10