Panasonic KX-TG6521E operating instructions Answering system is being used. *1 Wait

Page 45

TG6511-6521E(e).book Page 45 Monday, January 11, 2010 8:48 AM

 

Useful Information

 

 

Problem

Cause/solution

Noise is heard, sound cuts in

L You are using the handset or base unit in an

and out.

area with high electrical interference. Re-

 

position the base unit and use the handset

 

away from sources of interference.

 

L Move closer to the base unit.

 

L If you use a DSL/ADSL service, we

 

recommend connecting a DSL/ADSL filter

 

between the base unit and the telephone line

 

jack. Contact your DSL/ADSL provider for

 

details.

 

L Unplug the base unit’s AC adaptor to reset the

 

unit and turn off the handset. Reconnect the

 

adaptor, turn on the handset and try again.

Sound quality seems to be

L You have registered a handset that is not

getting worse.

recommended (page 4). The clearest sound

 

quality is only possible by registering the

 

recommended handset.

The handset does not ring.

L The ringer volume is turned off. Adjust ringer

 

volume (page 24).

The base unit does not ring.*1

L The ringer volume is turned off. Adjust ringer

 

volume (page 24).

I cannot make a call.

L The handset is too far from the base unit.

 

Move closer and try again.

 

L Another unit is in use. Wait and try again later.

 

L Answering system is being used.*1 Wait and

 

try again later.

 

L The key lock feature is turned on. Turn it off

 

(page 19).

*1 KX-TG6521/KX-TG6522/KX-TG6523/KX-TG6524

 

 

 

Helpline Tel. No.: U.K. 0844 844 3898 R.O.I. 01289 8333

45

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Image 45
Contents Before initial use, see Getting Started on Voice Mail Service Caller ID ServiceIntroduction Important InformationAccessory information Supplied accessoriesModel composition Additional/replacement accessories Accessory item Model numberExpanding your phone system Customer Care Centre Sales and support informationGeneral information For your future referenceDeclaration of Conformity For your safety Important safety instructions Other information Operating conditions Battery installation Setting upBattery charge ConnectionsDuring a power failure Battery level IconOperation Operating time Handset ControlsBase unit Secure gripKX-TG6521/KX-TG6522/ KX-TG6523/KX-TG6524 DisplayCharge contacts Speaker Erase Stop Handset display items MeaningTurning the power on/off LineUse One touch eco mode Initial settingsSymbol meaning Example V/ Off Display languageAnswering calls Making callsHold Useful features during a callMute Recall/flashKey lock Handset phonebook Copying phonebook entries Copying an entryCopying all entries Programming by scrolling through the display menus Programmable settingsRinger Setup *2 Ringer Volume Handset Base Unit *1 RingtoneKX-TG6523 KX-TG6524 Programming using the direct commands Base Unit PIN 0000 Repeater Mode Recall/Flash *9 Msec # 160 msec Privacy Mode *10Cancel Register Display English DefaultTG6511-6521Ee.book Page 26 Monday, January 11, 2010 848 AM Special programming AlarmChanging the handset name Incoming call barring Caller ID subscribers onlyChanging the base unit PIN Personal Identification Number Registering a unitOperating additional units Registering a handset to the base unitIncreasing the range of the base unit Setting the repeater modeKX-TG6511/KX-TG6512/ KX-TG6513 Deregistering a handsetCaller ID features Using Caller ID serviceCaller list Viewing the caller list and calling backErasing selected caller information Editing a caller’s phone number before calling backErasing all caller information Storing caller information to the phonebookTurning the answering system on/off Answering systemMemory capacity including your greeting message Call screeningGreeting message Listening to messages using the base unitErasing all messages Listening to messages using the handsetOperating the answering system Calling back Caller ID subscribers onlyUsing the answering system remotely Remote access codeRemote commands Remote operationNumber of rings before SettingsUnit answers a call Turning on the answeringSelecting Greeting Only Caller’s recording timeVoice mail service Conference calls Intercom Transferring callsHandset locator Making an intercom callWhen the unit displays the character entry screen Character entryCharacter entry modes Extended 2 character table O Extended 1 character table N Error messages Troubleshooting General use Problem Cause/solutionProgrammable settings Problem Cause/solution Problem Cause/solution Battery recharge Problem Cause/solutionMaking/answering calls, intercom Answering system is being used. *1 Wait Caller ID Problem Cause/solution Unit does not record new Wall mounting Liquid damage Problem Cause/solutionPanasonic Business Systems U.K Conditions of guaranteeIndex TG6511-6521Ee.book Page 51 Monday, January 11, 2010 848 AM Copyright Sales Department