Panasonic KX-TG2631 Setting up the base unit, Connecting the AC adaptor and telephone line cord

Page 10

Preparation

Setting up the base unit

Connecting the AC adaptor and telephone line cord

Connect the telephone line cord until it clicks into the base unit (A) and telephone line jack (B). Connect the AC adaptor cord by pressing the plug firmly (C).

LUse only the included Panasonic AC adaptor PQLV19 or PQLV255.

C

Hook

A

(120 V AC,

60 Hz)
To single-line
telephone jack	B
(RJ11C)

Note:

LThe AC adaptor must remain connected at all times. (It is normal for the adaptor to feel warm during use.)

LThe AC adaptor should be connected to a vertically oriented or floor-mounted AC outlet. Do not connect the AC adaptor to a ceiling-mounted AC outlet, as the weight of the adaptor may cause it to become disconnected.

LThe unit will not work during a power failure. We recommend connecting a standard telephone to the same telephone line or to the same telephone jack using a Panasonic T-adaptor (page 6). Emergency power can be supplied to the unit by connecting a Panasonic battery back-up power supply noted on page 6.

10For assistance, please visit http://www.panasonic.com/phonehelp

Image 10

Contents Operating Instructions Making/Answering Calls Introduction Thank you for purchasing a Panasonic cordless telephoneAbout these operating instructions Symbols used in these operating instructionsDescriptions of the multiple handsets and charger Included accessories Accessory informationQuantity Accessory item Order number Accessory item Order number Additional/replacement accessoriesSales and support information Important safety instructions Save These InstructionsBattery InstallationMedical Environment For best performanceBase unit location/avoiding noise Routine careSetting up the base unit Connecting the AC adaptor and telephone line cordIf you subscribe to a DSL service Setting up the handsetConnecting the charger Available modelBattery charge Battery installation/replacementBase unit Panasonic battery performance Operation Operating time Battery level Battery iconCharger Available model Controls Adjusting audio volume Ringer indicator Message indicator Receiver DisplayExample Flash Using the navigator key Microphone Charge contactsHandset soft keys DisplaysBase unit display items Displayed Meaning Handset display items Displayed Meaning item Setting the unit before useDialing mode Display languageDate and time Example 930 09Making calls Useful features during a call Answering callsMute For Call Waiting service usersTemporary tone dialing for rotary/ pulse service users Flash buttonCall share Available model Adding items to the phonebook Handset phonebookFinding and calling a phonebook item Erasing items in the phonebook Editing items in the phonebookChain dial Copying an item Copying all itemsMissed calls Using Caller ID serviceCaller ID features Private name displayViewing the caller list and calling back Caller ID number auto edit featureCaller list Editing a caller’s phone number before calling backOFF Erasing selected caller information Storing caller information into the phonebookSave Clear iOFF Erasing all caller informationProgramming by scrolling through the display menus Programmable settingsSave iOFF Main menu Sub-menu Main menu Sub-menu Feature Setting code System Code Programming using the direct commandsMenu Ring count Customer support Turning the answering system on/off Answering systemRecording your greeting message Skipping a message Pausing a messagePrerecorded greeting message Erasing a messageVoice guidance Answering system commandsKey Command Calling back Caller ID subscribers onlyKey Remote command Using the answering system remotelyRemote commands Remote operationRing count Answering system settingsRemote code Turning on the answering system remotelyCaller’s recording time For Voice Mail service subscribersMessage alert KX-TG2631 IntercomKX-TG2632 Transferring calls between handsets, conference calls Answering transferred callsRegistering a handset KX-TG2631 HandsetBase unit Wall mountingCharger Switching a call between the headset and speakerphone Headset optionalError messages Display message Cause/solutionProgrammable settings Problem Cause/solution TroubleshootingGeneral use Problem Cause/solution Battery recharge Problem Cause/solutionProblem Cause/solution Making/answering calls, intercomPhonebook Problem Cause/solution Caller ID Problem Cause/solutionAnswering system Problem Cause/solution FCC and other information Useful Information FCC RF Exposure Warning Specifications Customer services Customer Services DirectoryAve de Infantería, Km WarrantySan Gabriel Industrial Park One Panasonic Way Secaucus, New JerseyLimited Warranty Limits And Exclusions Index Index Page Panasonic Puerto Rico, Inc When you ship the productCopyright