Useful Information
Wall mounting
Base unit
Connect the telephone line cord. Mount the unit by inserting the mounting pins into the round openings on the adaptor (for pin 2, use round cut out at the bottom of the adaptor if you are using the 4 inches phone plate), then sliding the unit down to secure it.
Connect the AC adaptor to power outlet (page 10).
LThere are two common types of wall phone plates. The distance between 1 and 2 may vary depending on the size of the wall phone plate installed.
1
83 mm (31/4 inches)
or
102 mm (4 inches)
| 2 |
83 mm | 102 mm |
(31/4 inches) 1 | (4 inches) |
2 |
|
Charger
Available model:
1 Drive the screws (not included) into the wall using the wall template as a guide.
25.4 mm
(1 inch)
Screws
(120 V AC, 60 Hz)
2 Mount the charger (A), then slide it down (B) and to the right (C) until it is secure.
A
B
C
25.4mm (1 inch)
For assistance, please visit http://www.panasonic.com/phonehelp | 43 |