Intercom/Locator
2Wait for the paged party to answer.
L If paged party does not answer, press {INTERCOM} to return to the outside call.
3Proceed with the desired operation.
■To transfer the call:
Place the corded handset on the cradle. L The outside call is being routed to the
handset.
■To establish a conference call: Press {CONF}.
L To leave the conference, place the corded handset on the cradle. Other parties can continue the conversation.
L To put the outside call on hold, press {HOLD}. To resume the conference, press {CONF}.
YHandset
1During an outside call, press {HOLD} to put the call on hold.
L To return to the outside call, press {BACK}.
2To page the base unit, press {0}.
To page another handset, enter its extension number.
3Wait for the paged party to answer.
L If the paged party does not answer, press {C} to return to the outside call.
4Proceed with the desired operation.
■To transfer the call: Press {OFF}.
L The outside call is being routed to the destination unit.
■To establish a conference call: Press {CONF}.
L To leave the conference, press {OFF}. The other parties can continue the conversation.
L To put the outside call on hold, press {HOLD}. To resume the conference, press {CONF}.
Transferring a call without speaking to the other handset or base unit user
=Base unit
1Proceed with the desired operation.
■When 1 handset is registered:
During an outside call, press {INTERCOM}.
■When 2 or more handsets are registered: During an outside call, press {INTERCOM}.
–To page a specific handset, enter the handset number.
–To page all handsets, press {0} or wait for a few seconds.
2Place the corded handset on the cradle. L The outside call rings at the other unit.
YHandset
1During an outside call, press {HOLD} to put the call on hold.
L To return to the outside call, press {BACK}.
2To page the base unit, press {0}.
To page another handset, enter its extension number.
3{OFF}
L The outside call rings at the other unit.
Note for base unit and handset:
L If the other user does not answer the call within 1 minute, the call rings at your unit again.
Answering a transferred call
=Base unit
Lift the corded handset or press
YHandset
Press {C} to answer the page.
Note for base unit and handset:
L After the paging party disconnects, you can talk to the outside caller.
For assistance, please visit http://www.panasonic.com/help | 39 |