Programming
Programmable settings
You can customize the unit by programming the following features using the handset. To access the features, there are 2 methods:
–scrolling through the display menus (page 20)
–using the direct commands (page 22)
L Mainly the direct command method is used in these operating instructions.
Programming by scrolling through the display menus
1{MENU}
2Press {V} or {^} to select the desired main menu. i{Select}
3Press {V} or {^} to select the desired item in
4Press {V} or {^} to select the desired setting. i{Save}
L This step may vary depending on the feature being programmed. L To exit the operation, press {OFF}.
Note:
L See page 22 for the default settings.
Main menu |
| Page | |
Message play | – | – | 32 |
V.M. access | – | – | 37 |
Night mode | On/Off | – | 25 |
| Start/End | – | 25 |
Ringer setting | Ringer volume | – | – |
| Ringer tone | – | – |
Set date & time | Date and time*1 | – | 14 |
| Alarm | – | 25 |
| Time adjustment*1 | – | – |
Customer | – | – | 26 |
support |
|
|
|
20For assistance, please visit http://www.panasonic.com/help