Panasonic KX-FP181E operating instructions #43, #44, #46, #47, #49, For KX-FP185 only 16s, #54

Features Summary

Code	Display & Feature	Settings		How the unit operates
	■ For KX-FP185 only	ON		If you hear slow beeps, erase the
				recorded messages (p. 57). The
	REC. TIME ALERT
#43				beeps will stop.
	To alert you with beeps when there
	is less than 60 seconds of	OFF
	remaining recording time
				If you hear slow beeps, clear the
	RECEIVE ALERT	ON
				printing problem or supply paper to
	To alert you with beeps when a
#44				print the stored document. The
	received document is stored into
		OFF		beeps will stop.
	memory due to a problem.
				“ON”:You do not have to press
	FRIENDLY RCV	ON
				FAX START for fax reception.
#46	To receive a fax automatically
	when you answer a call and hear	OFF
	a fax calling tone (slow beep).
	■ For KX-FP185 only			Voice guidance examples:
				“Start transmission.”
	FAX GUIDANCE	ON
				“Transmission is complete.”
	If you wish to hear the voice
				“Transmission has failed.”
	guidance (see right) at each fax
				“Transmission has been interrupted.”
	transmission/reception, set this
#47		OFF		“Start reception.”
	feature to “ON”.
				“Reception is complete.”
	● To hear the voice guidance only
				“Reception has failed.”
	when fax transmission/reception
				“Reception has been interrupted.”
	fails, select “ERROR”.
		ERROR		“Please hang up the handset for
				reception.”
				“Start reception.”
	■ For KX-FP181 only	ON /		1. Follow steps 1–3 on page 68.
				2. Rotate	EASY DIAL		to select “ON”.
	AUTO DISCONNECT
		CODE=	0	3. Press	SET .
	To answer a call with an extension
#49				4. Enter your code from 2 to 4 digits,
	telephone in the TEL/FAX mode
				using 0–9 and		.
	(p. 45)
		OFF		5. Press	SET .
				6. Press	MENU .
	■ For KX-FP185 only	16s		“16s”: Up to 16 seconds
				“60s”: Up to 60 seconds
	GREETING TIME
#54
	To change the recording time for
	your own TAD/FAX greeting	60s
	message (p. 54)
		(The default setting is in bold type.)					(continued)

69