Ink Film
4 Remove the stoppers and tags from the new ink film. Find the “T” shaped gear (blue).
Tags
Stopper
New ink film |
|
“T” shaped gear (blue) | Stopper |
|
Insert the blue core of the front ink film roll | |
5 into the right slot of the unit ( 1 | ). Insert the |
“T” shaped gear (blue) into the left slot of the | |
unit ( 2 ). |
|
Insert the back ink film roll ( 3 | ). |
If the ink film is slack, tighten it by winding | |
6 the gear. |
|
Incorrect | Correct |
Tight
“T” shaped gear (blue)
2
Left slot
Front ink film roll
Back ink film roll
3
1
Right
slot
Blue core
Ink film
7 Close the back cover securely by pushing down on the dotted area at both ends ( 1 ). Close the front cover securely ( 2 ).
●The following message will be displayed while the unit is checking that there is no
slack on the ink film.
2
Display: | PLEASE WAIT |
Gear
Dotted area
1
| Front cover | Back cover |
Note: |
| |
Display |
| |
● The ink film is completely safe to touch, and will not |
| |
|
| |
rub off on your hands like carbon paper. |
|
|
84