•When you receive a call on your selected channel, you will hear audio from the speaker and the LED will light green.
•To use a signaling code, refer to “QUIET TALK/ DIGITAL QUIET TALK” on page 16.
rMake a Call.
1Press the MON key to make sure the channel is not in use {page 19}.
2Press and release the CAL key to alert the other parties that you are beginning a call.
•A call alert tone will sound on the other party’s transceiver.
3Press and hold the PTT switch, then speak into the speaker area to transmit.
•The LED lights red while transmitting.
•For best sound quality, speak into the speaker area in your normal speaking voice while holding the microphone approximately 1.5 inches (3 to 4 cm) from your lips.
4Release the PTT switch when you have finished speaking.
14