•While adjusting the VOX Delay Time, speak into the microphone to simulate transmitting. The LED lights orange while speaking, but no signal is transmitted at this time.
4Press the MENU key to exit the selection.
5Press the PTT, MON, or CAL key to exit Setting Mode.
Transmit Inhibit While Receiving
While using VOX, you can set the transceiver to detect when the channel is in use (in place of using the Monitor function). With this function turned on, VOX will not allow you to transmit while the channel is being used. You can transmit only when the channel is free. Setting up the proceed tone function {page 23} will notify you when the channel is free.
1With the transceiver power OFF, press and hold the MENU key while turning the transceiver power ON (for 1 second).
2Press the 
or 
key to select “ 
”.
3Press the MENU key then press 
or 
to select “ 
”
(transmit inhibit while receiving on) or “ 
” (transmit inhibit while receiving off).
4Press the MENU key to exit the selection.
5Press the PTT, MON, or CAL key to exit Setting Mode.
22