nPTT ID
The transceiver can send a PTT ID signal when pressing the PTT switch (beginning of transmission) or when pressing and releasing (beginning of transmission and end of transmission) the PTT switch.
1With the transceiver power OFF, press and hold the MENU key while turning the transceiver power ON (for 1 second).
2Press the 
or 
key to select “ 
”.
3Press the MENU key then press 
or 
to select
“ 
” (PTT ID is off), “ 
” (send your own PTT ID
at the beginning of transmission), or “ 
” to “ 
” (send selected list ID number PTT ID at the beginning and end of transmission).
4Press the MENU key to exit the selection.
5Press the PTT, MON, or CAL key to exit Setting Mode.
Note: Transceiver's individual ID number is not available for selection as PTT ID.
nPTT ID Side Tone
When the PTT switch is pressed and/or released, a tone will sound through your own speaker when the PTT ID is transmitted.
To turn the PTT ID Side Tone on or off:
30