Kenwood TK-3230 instruction manual Mute Hold Time

Page 40

1With the transceiver power OFF, press and hold the MENU key while turning the transceiver power ON (for 1 second).

2Press the or key to select “  ”.

3Press the MENU key then press or to select

“  ” (PTT ID Side Tone is on) or “  ” (PTT ID Side Tone is off).

4Press the MENU key to exit the selection.

5Press the PTT, MON, or CAL key to exit Setting Mode.

nMute Hold Time

Mute Hold Time keeps the speaker muted for a brief moment, after a signal has been received. This prevents interference with the PTT ID signal.

To set the hold time:

1With the transceiver power OFF, press and hold the MENU key while turning the transceiver power ON (for 1 second).

2Press the or key to select “  ”.

3Press the MENU key then press or to select

“  ” (hold time is off), “  ” (500 ms), “  ”

31

Image 40
Contents TK-3230 Thank You FeaturesOperating Conditions FCC License Information Channel SpacingIii FCC WarningSafety Information Precautions Page Contents Viii Unpacking and Checking Equipment Supplied AccessoriesPart Number Quantity Antenna LED Indicator Menu key Power switchVolume control PTT Push to Talk switchIcon Description DisplayBattery Pack Precautions PreparationInformation concerning the Li-ion battery pack Do not disassemble or reconstruct batteryDo not short-circuit the battery Do not incinerate or apply heat to the batteryDo not jar or throw the battery Do not reverse-charge or reverse-connect the battery Do not touch a ruptured and leaking batteryUsing the Li-ion Battery Pack Installing/ Removing the Battery Pack Charging the Battery Pack Installing/ Removing the Belt Clip Installing/ Removing Optional Accessories Switch the Power on Adjust the VolumeGetting Started Select a ChannelMake a Call Channel frequency setup Quiet Talk/ Digital Quiet Talk Press the or key to select your desired valueScanning the Channels Revert Channel Monitoring a Channel Squelch LevelVOX Operation Voice Activated Control VOXVOX Gain Level VOX Delay Time Transmit Inhibit While Receiving VOX Proceed Tone Privacy Talk Call Key Setup Call Alert Tone Call Alert Side Tone Press the PTT switch to transmit the selected selcall ID Selcall Selective CallingReceiving a Selcall PTT ID Mute Hold Time Caller ID Display Operating features Transmit PowerCompander Key LockSuper Lock Display BacklightMic Sense Time-out Timer Battery Saver Battery Level Indicator Incoming Call Notification Busy Channel Lockout BCL Beep ToneMode Reset Timer ID List SEtting Mode Press the Menu key then press or to select a Call ID typeResetting the Transceiver Optional Accessories Name Settings Default Ref. Pg MenusOFF/ 5 500 Mute Hold Time 1000/ 15 QT tones/ DQT codes Display QT FreqDisplay DQT Code Display DQT Code Display DQT Code Channel Frequencies SetupNumber MHz Specifications Troubleshooting Guide Problem Solution