Kenwood TK-3230 instruction manual OFF/ 5 500 Mute Hold Time 1000/ 15

Page 56

Display	Name	Settings	Default	Ref. Pg

		OFF/ 5 (500)/ 10
	Mute Hold Time	(1000)/ 15 (1500)/	OFF	31
	Mute Hold Time	20 (2000)/ 25	OFF	31
		(2500 ms)
	Caller ID Display	OFF/ ON	OFF	32
	Mode Reset Timer	OFF/ 10/ 30 sec	10 sec	42
	Time-out Timer	3/ 10 min	3 min	37
	Busy Channel	OFF/ ON	OFF	41
	Lockout	OFF/ ON	OFF	41
	Lockout
	Backlight	OFF/ ON/ A (Auto)	Auto	35
	Battery Level	OFF/ ON	ON	39
	Indicator	OFF/ ON	ON	39
	Indicator
	Battery Saver	OFF/ ON	OFF	38
	Beep Tone	OFF/ ON	ON	41
	Scan Function	OFF/ ON	OFF	17
	Squelch Level	0 ~ 2	1	19
	Mic Sense	no (Normal)/	Normal	36
	Mic Sense	HI (high)	Normal	36
		HI (high)
	VOX Gain Level	OFF/ 1 ~ 5	OFF	20
4	VOX Delay Time	0.1/ 0.3/ 0.5/ 1.0/	1.0 sec	21
	VOX Delay Time	1.5/ 3.0 sec	1.0 sec	21
		1.5/ 3.0 sec
4	Transmit Inhibit	OFF/ ON	OFF	22
	while Receiving	OFF/ ON	OFF	22
	while Receiving
4	VOX Proceed Tone	OFF/ ON	OFF	23
4

1Menus and are not available if the menu is set to OFF.

2Menu is not available if the menu is set to FleetSync.

3Menu is not available if the menu is set to OFF or Selcall.

4Menus , , and are not available if the menu is set to OFF.

47

Image 56

Contents TK-3230 Operating Conditions FeaturesThank You FCC License Information Channel SpacingIii FCC WarningSafety Information Precautions Page Contents Viii Part Number Quantity Supplied AccessoriesUnpacking and Checking Equipment Antenna LED Indicator Menu key Power switchVolume control PTT Push to Talk switchIcon Description DisplayBattery Pack Precautions PreparationInformation concerning the Li-ion battery pack Do not disassemble or reconstruct batteryDo not short-circuit the battery Do not incinerate or apply heat to the batteryDo not jar or throw the battery Do not reverse-charge or reverse-connect the battery Do not touch a ruptured and leaking batteryUsing the Li-ion Battery Pack Installing/ Removing the Battery Pack Charging the Battery Pack Installing/ Removing the Belt Clip Installing/ Removing Optional Accessories Switch the Power on Adjust the VolumeGetting Started Select a ChannelMake a Call Channel frequency setup Quiet Talk/ Digital Quiet Talk Press the or key to select your desired valueScanning the Channels Revert Channel Monitoring a Channel Squelch LevelVOX Gain Level Voice Activated Control VOXVOX Operation VOX Delay Time Transmit Inhibit While Receiving VOX Proceed Tone Privacy Talk Call Key Setup Call Alert Tone Call Alert Side Tone Press the PTT switch to transmit the selected selcall ID Selcall Selective CallingReceiving a Selcall PTT ID Mute Hold Time Caller ID Display Operating features Transmit PowerCompander Key LockSuper Lock Display BacklightMic Sense Time-out Timer Battery Saver Battery Level Indicator Incoming Call Notification Busy Channel Lockout BCL Beep ToneMode Reset Timer ID List SEtting Mode Press the Menu key then press or to select a Call ID typeResetting the Transceiver Optional Accessories Name Settings Default Ref. Pg MenusOFF/ 5 500 Mute Hold Time 1000/ 15 QT tones/ DQT codes Display QT FreqDisplay DQT Code Display DQT Code Display DQT Code Number MHz SetupChannel Frequencies Specifications Troubleshooting Guide Problem Solution