Kenwood TK-3230 ID List SEtting Mode, Press the Menu key then press or to select a Call ID type

Page 52

ID LIST SEtting Mode

You can set up ID list numbers with different call IDs.

1With the transceiver power OFF, press and hold the CAL key while turning the transceiver power ON (for 1 second).

A beep will sound and the transceiver will enter ID List Setting mode.

2Press the or key to select a list ID number.

List numbers range from 01 to 32.

3Press the MENU key then press or to select a Call ID type.

represents an Individual Call ID.

represents a Group Call ID.

represents a Broadcast Call ID.

represents your own ID number.

clears the selected ID data.

4Press the MENU key to set the Call ID type and return to the list.

Repeat steps 2 to 4 to set up additional list ID numbers.

5Press the PTT, MON, or CAL key to return to operating mode.

43

Image 52
Contents TK-3230 Thank You FeaturesOperating Conditions FCC License Information Channel SpacingIii FCC WarningSafety Information Precautions Page Contents Viii Unpacking and Checking Equipment Supplied AccessoriesPart Number Quantity Antenna LED Indicator Menu key Power switchVolume control PTT Push to Talk switchIcon Description DisplayBattery Pack Precautions PreparationInformation concerning the Li-ion battery pack Do not disassemble or reconstruct batteryDo not short-circuit the battery Do not incinerate or apply heat to the batteryDo not jar or throw the battery Do not reverse-charge or reverse-connect the battery Do not touch a ruptured and leaking batteryUsing the Li-ion Battery Pack Installing/ Removing the Battery Pack Charging the Battery Pack Installing/ Removing the Belt Clip Installing/ Removing Optional Accessories Switch the Power on Adjust the VolumeGetting Started Select a ChannelMake a Call Channel frequency setup Quiet Talk/ Digital Quiet Talk Press the or key to select your desired valueScanning the Channels Revert Channel Monitoring a Channel Squelch LevelVOX Operation Voice Activated Control VOXVOX Gain Level VOX Delay Time Transmit Inhibit While Receiving VOX Proceed Tone Privacy Talk Call Key Setup Call Alert Tone Call Alert Side Tone Press the PTT switch to transmit the selected selcall ID Selcall Selective CallingReceiving a Selcall PTT ID Mute Hold Time Caller ID Display Operating features Transmit PowerCompander Key LockSuper Lock Display BacklightMic Sense Time-out Timer Battery Saver Battery Level Indicator Incoming Call Notification Busy Channel Lockout BCL Beep ToneMode Reset Timer ID List SEtting Mode Press the Menu key then press or to select a Call ID typeResetting the Transceiver Optional Accessories Name Settings Default Ref. Pg MenusOFF/ 5 500 Mute Hold Time 1000/ 15 QT tones/ DQT codes Display QT FreqDisplay DQT Code Display DQT Code Display DQT Code Channel Frequencies SetupNumber MHz Specifications Troubleshooting Guide Problem Solution