Cobra Electronics LI 6500WXC To attach a speaker/microphone, To connect a wall charger/adapter

Page 11
Speaker/Microphone/Charge Jack

 

 

 

 

 

 

 

Introduction

Operation

Customer Assistance

Warranty

 

Your microTALK radio can be fitted with an external Speaker/Microphone, freeing your hands for other tasks. This same jack also serves as the connecting point for the wall charger/adapter.

Speaker/Microphone/ Charge Jack

To attach a speaker/microphone:

1.Open the speaker/microphone/charge tab on top of your microTALK radio.

2.Insert the plug into the speaker/ microphone/charge jack.

To connect a wall charger/adapter:

1.Open the speaker/microphone/charge tab on top of your microTALK radio.

2.Insert the wall charger/adapter plug

into the speaker/microphone/charge jack.

Signal Strength

Signal Strength Meter

Your microTALK radio has a Signal Strength Meter that shows the strength of your incoming and outgoing transmissions. The ascending bars next to the signal strength indicate the strength of the signal. The greater the number of bars visible, the stronger the signal. The fewer number of bars visible, the weaker the signal.

microTALK Range

Your range will vary depending on terrain and conditions.

Maximum Range

Reduced Range

Reduced Range

In flat, open country your radio will operate at maximum range.

Buildings and foliage in the path of the signal can reduce the range of the radio.

Dense foliage and hilly terrain will further reduce the range of the radio.

On FRS channels 8 through 14, your radio automatically switches to low power, which will limit the range the radio can communicate.

Remember, you can achieve maximum range by using maximum range extender. See page 6 for details.

7

Image 11
Contents LI 6500WXC Making Life Easier and Safer Product Features Privacy Codes FeaturesEstimated operation time on full charge 12 hours Replace battery compartment cover and belt clipCaring for Your microTALK Radio Insert radios into desktop charger as shown Using Your RadioOperation Call Button ChannelsOr Channel Down button Listening for a ResponseSeconds Press and release the HiLow buttonTo Illuminate Display For less than five seconds Lock FeatureTo turn the lock feature on or off Auto Squelch/Maximum RangeMicroTALK Range Signal Strength MeterTo attach a speaker/microphone To connect a wall charger/adapterPrivacy Codes Mode FunctionsScrolling through Mode Functions Set Keystroke Tones On/OffTo proceed to step Set Ctcss Privacy CodesTo select a Ctcss privacy code After selecting a channel, pressThrough Set DCS Privacy CodesTo select a DCS privacy code Small numbers flash on the displayTo listen to All Hazards Radio channels NOAA* All Hazards Radio ChannelsTo set VOX sensitivity To turn VOX mode on or offVoice Activated Transmit VOX Press the Lock/Enter button Memory LocationsTo program a memory location Press the Lock/Enter button to enterChoose one of the following Press the Mode button toWhile recalling a stored memory location To recall a stored memory channel locationDisplay While de-programming a memory location To de-program a memory locationFlash on the display To scan channels Channel ScanYour microTALK radio can automatically scan channels If you press the Talk button while scanning, but more than Press the Mode button to proceed to set privacyTo scan privacy codes Privacy Code ScanMode Functions To scan memory locations Memory Location ScanPress the Mode button to proceed to other functions Is displayed To change call settingsVibrAlert and Call Alert Roger Beep Confirmation Tone Call Tone SettingsTo change a call tone setting Press the Mode button untilTo change keystroke tones Keystroke TonesGeneral Specifications General Specifications and FCC LicenseImportant Notice FCC License Required Product Service Product ServiceSafety Information for microTALK Radios Safety and Trademark AcknowledgementLimited One-Year Warranty on Radios & Charger Warranty