Cobra Electronics LI 6500WXC Press and release the HiLow button, To Illuminate Display, Seconds

Page 9

Selectable High•Medium•Low Power Output

Introduction

Operation

Customer Assistance Warranty

Hi-Low Button

Hi Power Icon

Medium Power Icon

Low Power Icon

Light/Max Range

•

When in close proximity to another party or during favorable conditions, you can switch from High to Medium to Low Power to extend battery life.

This feature applies to GMRS Channels 1 through 7 and 15 through 22 only. Channels 8 through 14 operate exclusively on low power.

To switch from high to medium to low power:

–Press and release the Hi•Low button.

When in High Power and using Channels 1 through 7 and 15 through 22, the Hi icon will be visible in the LCD display.

When in Medium Power and using Channels 1 through 7 and 15 through 22, the Med icon will be visible in the LCD.

When in Low Power or while using channels 8 through 14, the Low icon will be visible in the display.

To Illuminate Display

•

Press and release the Light/Max Range button to illuminate the display for

10 seconds.

5

Image 9

Contents LI 6500WXC Making Life Easier and Safer Product Features Privacy Codes FeaturesReplace battery compartment cover and belt clip Caring for Your microTALK RadioEstimated operation time on full charge 12 hours Insert radios into desktop charger as shown Using Your RadioOperation Or Channel Down button ChannelsListening for a Response Call ButtonPress and release the HiLow button To Illuminate DisplaySeconds To turn the lock feature on or off Lock FeatureAuto Squelch/Maximum Range For less than five secondsTo attach a speaker/microphone Signal Strength MeterTo connect a wall charger/adapter MicroTALK RangeScrolling through Mode Functions Mode FunctionsSet Keystroke Tones On/Off Privacy CodesTo select a Ctcss privacy code Set Ctcss Privacy CodesAfter selecting a channel, press To proceed to stepTo select a DCS privacy code Set DCS Privacy CodesSmall numbers flash on the display ThroughTo listen to All Hazards Radio channels NOAA* All Hazards Radio ChannelsTo turn VOX mode on or off Voice Activated Transmit VOXTo set VOX sensitivity To program a memory location Memory LocationsPress the Lock/Enter button to enter Press the Lock/Enter buttonChoose one of the following Press the Mode button toTo recall a stored memory channel location DisplayWhile recalling a stored memory location To de-program a memory location Flash on the displayWhile de-programming a memory location Channel Scan Your microTALK radio can automatically scan channelsTo scan channels If you press the Talk button while scanning, but more than Press the Mode button to proceed to set privacyTo scan privacy codes Privacy Code ScanMode Functions To scan memory locations Memory Location ScanPress the Mode button to proceed to other functions To change call settings VibrAlert and Call AlertIs displayed To change a call tone setting Call Tone SettingsPress the Mode button until Roger Beep Confirmation ToneTo change keystroke tones Keystroke TonesGeneral Specifications General Specifications and FCC LicenseImportant Notice FCC License Required Product Service Product ServiceSafety Information for microTALK Radios Safety and Trademark AcknowledgementLimited One-Year Warranty on Radios & Charger Warranty