Cobra Electronics LI 6500WXC owner manual Call Tone Settings, To change a call tone setting

Page 28

Mode Functions

Operation

10 Call Tone Settings

•

You can choose from 10 different call tone settings to transmit a unique call alert.

Mode Button

Call Tone Setting

Channel Buttons

To change a call tone setting:

1.Press the Mode button until the

letter “C” and the current call tone number (01 through 10) is displayed.

2.Press the Channel Up or Channel Down button to hear the other call tone settings.

3.Choose one of the following:

a.Press the Mode button to enter the new setting and proceed to other functions.

b.Press the Lock/Enter button to enter the new setting and return to Standby mode.

Roger Beep Confirmation Tone

•

Roger Beep is an audible tone that your listener will hear when you release the Talk button. This alerts the other party that you are finished talking and it is OK for them to speak.

Mode Button

Roger Beep On

Channel Buttons

To turn roger beep on or off:

1.Press the Mode button until the

Roger Beep icon flashes on the display. The current on or off setting is displayed.

2.Press the Channel Up or Channel Down button to select roger beep on or off.

3.Choose one of the following:

a.Press the Mode button to enter

the new setting and proceed to other functions.

b.Press the Lock/Enter button to enter the new setting and return to Standby mode.

24

Image 28

Contents LI 6500WXC Making Life Easier and Safer Product Features Features Privacy CodesCaring for Your microTALK Radio Replace battery compartment cover and belt clipEstimated operation time on full charge 12 hours Using Your Radio Insert radios into desktop charger as shownOperation Channels Or Channel Down buttonListening for a Response Call ButtonTo Illuminate Display Press and release the HiLow buttonSeconds Lock Feature To turn the lock feature on or offAuto Squelch/Maximum Range For less than five secondsSignal Strength Meter To attach a speaker/microphoneTo connect a wall charger/adapter MicroTALK RangeMode Functions Scrolling through Mode FunctionsSet Keystroke Tones On/Off Privacy CodesSet Ctcss Privacy Codes To select a Ctcss privacy codeAfter selecting a channel, press To proceed to stepSet DCS Privacy Codes To select a DCS privacy codeSmall numbers flash on the display ThroughNOAA* All Hazards Radio Channels To listen to All Hazards Radio channelsVoice Activated Transmit VOX To turn VOX mode on or offTo set VOX sensitivity Memory Locations To program a memory locationPress the Lock/Enter button to enter Press the Lock/Enter buttonPress the Mode button to Choose one of the followingDisplay To recall a stored memory channel locationWhile recalling a stored memory location Flash on the display To de-program a memory locationWhile de-programming a memory location Your microTALK radio can automatically scan channels Channel ScanTo scan channels Press the Mode button to proceed to set privacy If you press the Talk button while scanning, but more thanPrivacy Code Scan To scan privacy codesMode Functions Memory Location Scan To scan memory locationsPress the Mode button to proceed to other functions VibrAlert and Call Alert To change call settingsIs displayed Call Tone Settings To change a call tone settingPress the Mode button until Roger Beep Confirmation ToneKeystroke Tones To change keystroke tonesGeneral Specifications and FCC License General SpecificationsImportant Notice FCC License Required Product Service Product ServiceSafety and Trademark Acknowledgement Safety Information for microTALK RadiosWarranty Limited One-Year Warranty on Radios & Charger