Cobra Electronics LI 6500WXC Channels, Or Channel Down button, Listening for a Response

Page 8

Operation	Using Your Radio
Operation
Channel Buttons	Channels	•
	With the radio on, select any of the	•
	With the radio on, select any of the
	22 channels by pressing the Channel Up
	or Channel Down button.
Channel Number	Both radios must be tuned to the
	same channel to communicate.
	Channels 1 through 7 are shared by FRS and
	GMRS. Channels 8 through 14 are FRS only.
	Channels 15 through 22 are GMRS only.
	See page 26 for FRS/GMRS frequency
	allocations and compatibility charts.
Listening	Listening for a Response	•
	Release the Talk button to receive incoming	•
	Release the Talk button to receive incoming
	transmissions. Your microTALK radio is always
	in Standby mode while the Talk or
	Call buttons are not pressed.
Call Button	Call Button	•
	To alert another person that you are calling:	•
	To alert another person that you are calling:
	– Press and release the Call button.
	The other person will hear a two second
	call tone. This tone is used only to establish
	voice communications.
	See page 24 on how to select from
	10 available call tone settings.

Image 8

Contents LI 6500WXC Making Life Easier and Safer Product Features Features Privacy CodesEstimated operation time on full charge 12 hours Replace battery compartment cover and belt clipCaring for Your microTALK Radio Using Your Radio Insert radios into desktop charger as shownOperation Channels Or Channel Down buttonListening for a Response Call ButtonSeconds Press and release the HiLow buttonTo Illuminate Display Lock Feature To turn the lock feature on or offAuto Squelch/Maximum Range For less than five secondsSignal Strength Meter To attach a speaker/microphoneTo connect a wall charger/adapter MicroTALK RangeMode Functions Scrolling through Mode FunctionsSet Keystroke Tones On/Off Privacy CodesSet Ctcss Privacy Codes To select a Ctcss privacy codeAfter selecting a channel, press To proceed to stepSet DCS Privacy Codes To select a DCS privacy codeSmall numbers flash on the display ThroughNOAA* All Hazards Radio Channels To listen to All Hazards Radio channelsTo set VOX sensitivity To turn VOX mode on or offVoice Activated Transmit VOX Memory Locations To program a memory locationPress the Lock/Enter button to enter Press the Lock/Enter buttonPress the Mode button to Choose one of the followingWhile recalling a stored memory location To recall a stored memory channel locationDisplay While de-programming a memory location To de-program a memory locationFlash on the display To scan channels Channel ScanYour microTALK radio can automatically scan channels Press the Mode button to proceed to set privacy If you press the Talk button while scanning, but more thanPrivacy Code Scan To scan privacy codesMode Functions Memory Location Scan To scan memory locationsPress the Mode button to proceed to other functions Is displayed To change call settingsVibrAlert and Call Alert Call Tone Settings To change a call tone settingPress the Mode button until Roger Beep Confirmation ToneKeystroke Tones To change keystroke tonesGeneral Specifications and FCC License General SpecificationsImportant Notice FCC License Required Product Service Product ServiceSafety and Trademark Acknowledgement Safety Information for microTALK RadiosWarranty Limited One-Year Warranty on Radios & Charger

Operation

Using Your Radio

Channels

or Channel Down button.

Both radios must be tuned to the

same channel to communicate.

Listening for a Response

Call Button

10 available call tone settings.