Cobra Electronics LI 6500WXC owner manual Choose one of the following, Press the Mode button to

Page 18

Mode Functions

Operation

6.Choose one of the following:

a.Press the Channel Up or Channel Down button to select a CTCSS privacy code (01 through 38) for the channel.

b.Press the Lock/Enter button to switch from CTCSS to DCS. The DCS icon and privacy code numbers will flash on the display. The Channel Up or Channel Down button can then be used to select a DCS privacy code (01 through 83) for the channel.

If “OFF” flashes in place of the privacy code numbers, a privacy code is already set in the opposite (CTCSS

or DCS) system. Press the Channel Up or Channel Down button to cancel the opposite code and select a privacy code from the active system for the selected channel.

7.Choose one of the following:

a.Press the Lock/Enter button to enter the channel/privacy code in the selected memory location. Radio then proceeds to next memory location, which will blink.

b.Press the Mode button to

enter the channel/privacy code in the selected memory location and proceed to other functions on the channel/privacy code displayed before you entered mode functions.

c.Press the Talk button to enter the channel/privacy code in the selected memory location and exit mode functions. Upon release of the Talk button, the radio will enter Standby mode on the channel/privacy code just entered.

14

Image 18

Contents LI 6500WXC Making Life Easier and Safer Product Features Features Privacy CodesReplace battery compartment cover and belt clip Caring for Your microTALK RadioEstimated operation time on full charge 12 hours Using Your Radio Insert radios into desktop charger as shownOperation Listening for a Response ChannelsOr Channel Down button Call ButtonPress and release the HiLow button To Illuminate DisplaySeconds Auto Squelch/Maximum Range Lock FeatureTo turn the lock feature on or off For less than five secondsTo connect a wall charger/adapter Signal Strength MeterTo attach a speaker/microphone MicroTALK RangeSet Keystroke Tones On/Off Mode FunctionsScrolling through Mode Functions Privacy CodesAfter selecting a channel, press Set Ctcss Privacy CodesTo select a Ctcss privacy code To proceed to stepSmall numbers flash on the display Set DCS Privacy CodesTo select a DCS privacy code ThroughNOAA* All Hazards Radio Channels To listen to All Hazards Radio channelsTo turn VOX mode on or off Voice Activated Transmit VOXTo set VOX sensitivity Press the Lock/Enter button to enter Memory LocationsTo program a memory location Press the Lock/Enter buttonPress the Mode button to Choose one of the followingTo recall a stored memory channel location DisplayWhile recalling a stored memory location To de-program a memory location Flash on the displayWhile de-programming a memory location Channel Scan Your microTALK radio can automatically scan channelsTo scan channels Press the Mode button to proceed to set privacy If you press the Talk button while scanning, but more thanPrivacy Code Scan To scan privacy codesMode Functions Memory Location Scan To scan memory locationsPress the Mode button to proceed to other functions To change call settings VibrAlert and Call AlertIs displayed Press the Mode button until Call Tone SettingsTo change a call tone setting Roger Beep Confirmation ToneKeystroke Tones To change keystroke tonesGeneral Specifications and FCC License General SpecificationsImportant Notice FCC License Required Product Service Product ServiceSafety and Trademark Acknowledgement Safety Information for microTALK RadiosWarranty Limited One-Year Warranty on Radios & Charger