Cobra Electronics LI 6500WXC owner manual Privacy Code Scan, To scan privacy codes

Page 23


	Introduction	Operation	Customer Assistance	Warranty

Privacy Code Scan

•

Your microTALK radio can automatically scan the Privacy Codes (either CTCSS 01 through 38 or DCS 01 through 83) within one channel. Only one set of privacy codes (CTCSS or DCS) can be scanned at a time.

Select Channel

To scan privacy codes:

Mode Button

Scan Privacy Codes

Channel Buttons

1.While in Standby mode, press the Channel Up or Channel Down button to choose the channel on which you wish to scan privacy codes.

2.Press the Mode button until either the CTCSS or the DCS icon appears on the display and the Scan icon and the privacy code numbers flash on the display.

3.Press the Channel Up or Channel Down button to begin scanning privacy codes within the channel you selected.

The Scan icon will continue to be displayed when privacy code scan is on. Your radio will continue to scan privacy codes and stop as an incoming transmission is detected. Your radio will remain on that channel/privacy code for 10 seconds.

While setting privacy code scan, if you do not press any buttons for 15 seconds, your radio will automatically return to Standby mode on the channel/privacy code that was displayed before you entered mode functions.

19

Image 23

Contents LI 6500WXC Making Life Easier and Safer Product Features Privacy Codes FeaturesEstimated operation time on full charge 12 hours Replace battery compartment cover and belt clipCaring for Your microTALK Radio Insert radios into desktop charger as shown Using Your RadioOperation Call Button ChannelsOr Channel Down button Listening for a ResponseSeconds Press and release the HiLow buttonTo Illuminate Display For less than five seconds Lock FeatureTo turn the lock feature on or off Auto Squelch/Maximum RangeMicroTALK Range Signal Strength MeterTo attach a speaker/microphone To connect a wall charger/adapterPrivacy Codes Mode FunctionsScrolling through Mode Functions Set Keystroke Tones On/OffTo proceed to step Set Ctcss Privacy CodesTo select a Ctcss privacy code After selecting a channel, pressThrough Set DCS Privacy CodesTo select a DCS privacy code Small numbers flash on the displayTo listen to All Hazards Radio channels NOAA* All Hazards Radio ChannelsTo set VOX sensitivity To turn VOX mode on or offVoice Activated Transmit VOX Press the Lock/Enter button Memory LocationsTo program a memory location Press the Lock/Enter button to enterChoose one of the following Press the Mode button toWhile recalling a stored memory location To recall a stored memory channel locationDisplay While de-programming a memory location To de-program a memory locationFlash on the display To scan channels Channel ScanYour microTALK radio can automatically scan channels If you press the Talk button while scanning, but more than Press the Mode button to proceed to set privacyTo scan privacy codes Privacy Code ScanMode Functions To scan memory locations Memory Location ScanPress the Mode button to proceed to other functions Is displayed To change call settingsVibrAlert and Call Alert Roger Beep Confirmation Tone Call Tone SettingsTo change a call tone setting Press the Mode button untilTo change keystroke tones Keystroke TonesGeneral Specifications General Specifications and FCC LicenseImportant Notice FCC License Required Product Service Product ServiceSafety Information for microTALK Radios Safety and Trademark AcknowledgementLimited One-Year Warranty on Radios & Charger Warranty