Cobra Electronics LI 6500WXC If you press the Talk button while scanning, but more than

Page 22

Mode Functions

Operation

During channel scan (while receiving an incoming transmission), you can choose from the following:

a. Press and hold the Talk button to communicate on that channel. Your radio will remain on that channel and return to Standby mode.

b. Press the Channel Up or Channel Down button to resume scanning channels.

If you press the Talk button while scanning, but more than

10 seconds after receiving a transmission, you will transmit on the channel on which you last received a transmission. This will return the radio to Standby mode.

If you do not press any button within 10 seconds after receiving a scanned transmission, your radio will automatically resume scanning channels.

During channel scan (while not receiving a transmission), you can choose from the following:

a. Press and hold the Talk button to communicate on the channel or channel/privacy code that was displayed before you entered mode functions or the channel on which, during scanning, you last received a transmission. This will then return the radio to Standby mode.

b. Press the Mode button to proceed to set privacy

code scan on the channel that was either displayed before you entered mode functions or on which, during channel scanning, you last received a transmission (see page 19 for further details).

c. Press the Lock/Enter button to return to Standby mode on the channel/privacy code that was displayed before you entered mode functions or the channel on which, during scanning, you last received a transmission.

18

Image 22

Contents LI 6500WXC Making Life Easier and Safer Product Features Features Privacy CodesCaring for Your microTALK Radio Replace battery compartment cover and belt clipEstimated operation time on full charge 12 hours Using Your Radio Insert radios into desktop charger as shownOperation Listening for a Response ChannelsOr Channel Down button Call ButtonTo Illuminate Display Press and release the HiLow buttonSeconds Auto Squelch/Maximum Range Lock FeatureTo turn the lock feature on or off For less than five secondsTo connect a wall charger/adapter Signal Strength MeterTo attach a speaker/microphone MicroTALK RangeSet Keystroke Tones On/Off Mode FunctionsScrolling through Mode Functions Privacy CodesAfter selecting a channel, press Set Ctcss Privacy CodesTo select a Ctcss privacy code To proceed to stepSmall numbers flash on the display Set DCS Privacy CodesTo select a DCS privacy code ThroughNOAA* All Hazards Radio Channels To listen to All Hazards Radio channelsVoice Activated Transmit VOX To turn VOX mode on or offTo set VOX sensitivity Press the Lock/Enter button to enter Memory LocationsTo program a memory location Press the Lock/Enter buttonPress the Mode button to Choose one of the followingDisplay To recall a stored memory channel locationWhile recalling a stored memory location Flash on the display To de-program a memory locationWhile de-programming a memory location Your microTALK radio can automatically scan channels Channel ScanTo scan channels Press the Mode button to proceed to set privacy If you press the Talk button while scanning, but more thanPrivacy Code Scan To scan privacy codesMode Functions Memory Location Scan To scan memory locationsPress the Mode button to proceed to other functions VibrAlert and Call Alert To change call settingsIs displayed Press the Mode button until Call Tone SettingsTo change a call tone setting Roger Beep Confirmation ToneKeystroke Tones To change keystroke tonesGeneral Specifications and FCC License General SpecificationsImportant Notice FCC License Required Product Service Product ServiceSafety and Trademark Acknowledgement Safety Information for microTALK RadiosWarranty Limited One-Year Warranty on Radios & Charger