Cobra Electronics LI 6500WXC owner manual Voice Activated Transmit VOX, To turn VOX mode on or off

Page 16

Mode Functions

Operation

Voice Activated Transmit (VOX)

•

In VOX mode, your microTALK radio can be used “hands-free,” automatically transmitting when you speak. You can set the VOX sensitivity level to fit the volume of your voice and avoid transmissions triggered by background noise.

Mode Button

VOX Icon

Channel Buttons

Mode Button

To turn VOX mode on or off:

1.Press the Mode button until the VOX icon flashes on the display. The current on or off setting is displayed.

2.Press the Channel Up or Channel Down button to turn VOX on or off.

3.Choose one of the following:

a.Press the Mode button to enter the selected on or off setting and proceed to other functions.

b.Press the Lock/Enter button to enter the selected on or off setting and return to Standby mode.

To set VOX sensitivity:

1.Press the Mode button until the VOX icon flashes and the current sensitivity level is displayed.

VOX Sensitivity Level

Channel Buttons

The current sensitivity level is displayed with letters “LE” and a Number 01 through 05, with Number 05 being the most sensitive level and Number 01 being the least sensitive level.

2.Press the Channel Up or Channel Down button to change the setting.

3.Choose one of the following:

a.Press the Mode button to enter the selected setting and proceed to other functions.

b.Press the Lock/Enter button to enter the selected setting and return to Standby mode.

12

Image 16

Contents LI 6500WXC Making Life Easier and Safer Product Features Features Privacy CodesCaring for Your microTALK Radio Replace battery compartment cover and belt clipEstimated operation time on full charge 12 hours Using Your Radio Insert radios into desktop charger as shownOperation Channels Or Channel Down buttonListening for a Response Call ButtonTo Illuminate Display Press and release the HiLow buttonSeconds Lock Feature To turn the lock feature on or offAuto Squelch/Maximum Range For less than five secondsSignal Strength Meter To attach a speaker/microphoneTo connect a wall charger/adapter MicroTALK RangeMode Functions Scrolling through Mode FunctionsSet Keystroke Tones On/Off Privacy CodesSet Ctcss Privacy Codes To select a Ctcss privacy codeAfter selecting a channel, press To proceed to stepSet DCS Privacy Codes To select a DCS privacy codeSmall numbers flash on the display ThroughNOAA* All Hazards Radio Channels To listen to All Hazards Radio channelsVoice Activated Transmit VOX To turn VOX mode on or offTo set VOX sensitivity Memory Locations To program a memory locationPress the Lock/Enter button to enter Press the Lock/Enter buttonPress the Mode button to Choose one of the followingDisplay To recall a stored memory channel locationWhile recalling a stored memory location Flash on the display To de-program a memory locationWhile de-programming a memory location Your microTALK radio can automatically scan channels Channel ScanTo scan channels Press the Mode button to proceed to set privacy If you press the Talk button while scanning, but more thanPrivacy Code Scan To scan privacy codesMode Functions Memory Location Scan To scan memory locationsPress the Mode button to proceed to other functions VibrAlert and Call Alert To change call settingsIs displayed Call Tone Settings To change a call tone settingPress the Mode button until Roger Beep Confirmation ToneKeystroke Tones To change keystroke tonesGeneral Specifications and FCC License General SpecificationsImportant Notice FCC License Required Product Service Product ServiceSafety and Trademark Acknowledgement Safety Information for microTALK RadiosWarranty Limited One-Year Warranty on Radios & Charger