Cobra Electronics LI 6500WXC owner manual Press the Mode button to proceed to other functions

Page 26

Mode Functions

Operation

During memory location scan (while receiving an Incoming transmission), you can choose from the following:

a. Press and hold the Talk button to communicate on that memory location.

b. Your radio will remain on that memory location and return to Standby mode. Press the Channel Up or Channel Down button to resume scanning memory locations.

c. After 10 seconds of inactivity, unit starts scan again.

If you press the Talk button while scanning, but more than

10 seconds after receiving a transmission, you will transmit on the memory location on which, during scanning, you last received a transmission.

If you do not press any button within 10 seconds, your radio will automatically resume scanning memory locations.

During memory location scan (while not receiving a transmission), you can choose from the following:

a. Press and hold the Talk button to communicate on the channel/privacy code that was displayed before you entered mode functions or memory location on which, during scanning, you last received a transmission.

b. Press the Mode button to proceed to other functions.

c. Press the Lock/Enter button to return to Standby mode on the channel/privacy code that was displayed before you entered mode functions or the memory location on which, during scanning, you last received a transmission.

To reduce the number of memory locations being scanned, you may de-program any unwanted locations. (See page 16 to de-program a memory location.)

22

Image 26

Contents LI 6500WXC Making Life Easier and Safer Product Features Features Privacy CodesEstimated operation time on full charge 12 hours Replace battery compartment cover and belt clipCaring for Your microTALK Radio Using Your Radio Insert radios into desktop charger as shownOperation Listening for a Response ChannelsOr Channel Down button Call ButtonSeconds Press and release the HiLow buttonTo Illuminate Display Auto Squelch/Maximum Range Lock FeatureTo turn the lock feature on or off For less than five secondsTo connect a wall charger/adapter Signal Strength MeterTo attach a speaker/microphone MicroTALK RangeSet Keystroke Tones On/Off Mode FunctionsScrolling through Mode Functions Privacy CodesAfter selecting a channel, press Set Ctcss Privacy CodesTo select a Ctcss privacy code To proceed to stepSmall numbers flash on the display Set DCS Privacy CodesTo select a DCS privacy code ThroughNOAA* All Hazards Radio Channels To listen to All Hazards Radio channelsTo set VOX sensitivity To turn VOX mode on or offVoice Activated Transmit VOX Press the Lock/Enter button to enter Memory LocationsTo program a memory location Press the Lock/Enter buttonPress the Mode button to Choose one of the followingWhile recalling a stored memory location To recall a stored memory channel locationDisplay While de-programming a memory location To de-program a memory locationFlash on the display To scan channels Channel ScanYour microTALK radio can automatically scan channels Press the Mode button to proceed to set privacy If you press the Talk button while scanning, but more thanPrivacy Code Scan To scan privacy codesMode Functions Memory Location Scan To scan memory locationsPress the Mode button to proceed to other functions Is displayed To change call settingsVibrAlert and Call Alert Press the Mode button until Call Tone SettingsTo change a call tone setting Roger Beep Confirmation ToneKeystroke Tones To change keystroke tonesGeneral Specifications and FCC License General SpecificationsImportant Notice FCC License Required Product Service Product ServiceSafety and Trademark Acknowledgement Safety Information for microTALK RadiosWarranty Limited One-Year Warranty on Radios & Charger