Cobra Electronics LI 6500WXC owner manual Memory Locations, To program a memory location

Page 17


	Introduction	Operation	Customer Assistance	Warranty

10 Memory Locations

•

Your microTALK radio has 10 Memory Locations for storing your most frequently used channels and channel/privacy code combinations. These Memory Locations can be selected individually or can be scanned. (See page 21 for memory location scan.)

Mode Button

Memory Icon

Channel Buttons

Lock/Enter Button

To program a memory location:

1.Press the Mode button until the Memory icon and the memory location flash on the display.

2.Press the Channel Up or Channel Down button to select the memory location (0 through 9).

If a location has been programmed before, its associated channel/privacy code will be shown on the display.

3.Press the Lock/Enter button to enter

a new memory location or edit an already programmed memory location. The channel numbers will flash on the display.

4.Press the Channel Up or Channel Down button to select a channel (1 through 22).

5.Press the Lock/Enter button.

The CTCSS icon and privacy code numbers will flash on the display.

13

Image 17

Contents LI 6500WXC Making Life Easier and Safer Product Features Privacy Codes FeaturesEstimated operation time on full charge 12 hours Replace battery compartment cover and belt clipCaring for Your microTALK Radio Insert radios into desktop charger as shown Using Your RadioOperation Or Channel Down button ChannelsListening for a Response Call ButtonSeconds Press and release the HiLow buttonTo Illuminate Display To turn the lock feature on or off Lock FeatureAuto Squelch/Maximum Range For less than five secondsTo attach a speaker/microphone Signal Strength MeterTo connect a wall charger/adapter MicroTALK RangeScrolling through Mode Functions Mode FunctionsSet Keystroke Tones On/Off Privacy CodesTo select a Ctcss privacy code Set Ctcss Privacy CodesAfter selecting a channel, press To proceed to stepTo select a DCS privacy code Set DCS Privacy CodesSmall numbers flash on the display ThroughTo listen to All Hazards Radio channels NOAA* All Hazards Radio ChannelsTo set VOX sensitivity To turn VOX mode on or offVoice Activated Transmit VOX To program a memory location Memory LocationsPress the Lock/Enter button to enter Press the Lock/Enter buttonChoose one of the following Press the Mode button toWhile recalling a stored memory location To recall a stored memory channel locationDisplay While de-programming a memory location To de-program a memory locationFlash on the display To scan channels Channel ScanYour microTALK radio can automatically scan channels If you press the Talk button while scanning, but more than Press the Mode button to proceed to set privacyTo scan privacy codes Privacy Code ScanMode Functions To scan memory locations Memory Location ScanPress the Mode button to proceed to other functions Is displayed To change call settingsVibrAlert and Call Alert To change a call tone setting Call Tone SettingsPress the Mode button until Roger Beep Confirmation ToneTo change keystroke tones Keystroke TonesGeneral Specifications General Specifications and FCC LicenseImportant Notice FCC License Required Product Service Product ServiceSafety Information for microTALK Radios Safety and Trademark AcknowledgementLimited One-Year Warranty on Radios & Charger Warranty