Cobra Electronics LI 6500WXC owner manual To de-program a memory location, Flash on the display

Page 20

Operation

Mode Button

Memory Icon

Channel Buttons

Lock/Enter Button

Channel 0

16

Mode Functions

To de-program a memory location:

1.Press the Mode button until the Memory icon and the memory location

flash on the display.

2.Press the Channel Up or Channel Down button to select the memory location (0 through 9).

If a location has been programmed before, its associated channel/privacy code will be shown on the display.

3. Press the Lock/Enter button. The channel numbers will flash on the display.

4.Press the Channel Up or Channel Down button to select Channel 0.

5.Choose one of the following:

a.Press the Lock/Enter button to enter the channel/privacy code in the selected memory location and return to the beginning of memory location options.

b.Press the Mode button to

enter the channel/privacy code in the selected memory location and proceed to other functions on the channel/privacy code displayed before you entered mode functions.

While de-programming a memory location,

if you do not press any buttons for 15 seconds, your radio will automatically return to Standby mode on the channel/privacy code displayed before you entered mode functions.

Image 20

Contents LI 6500WXC Making Life Easier and Safer Product Features Features Privacy CodesEstimated operation time on full charge 12 hours Replace battery compartment cover and belt clipCaring for Your microTALK Radio Using Your Radio Insert radios into desktop charger as shownOperation Channels Or Channel Down buttonListening for a Response Call ButtonSeconds Press and release the HiLow buttonTo Illuminate Display Lock Feature To turn the lock feature on or offAuto Squelch/Maximum Range For less than five secondsSignal Strength Meter To attach a speaker/microphoneTo connect a wall charger/adapter MicroTALK RangeMode Functions Scrolling through Mode FunctionsSet Keystroke Tones On/Off Privacy CodesSet Ctcss Privacy Codes To select a Ctcss privacy codeAfter selecting a channel, press To proceed to stepSet DCS Privacy Codes To select a DCS privacy codeSmall numbers flash on the display ThroughNOAA* All Hazards Radio Channels To listen to All Hazards Radio channelsTo set VOX sensitivity To turn VOX mode on or offVoice Activated Transmit VOX Memory Locations To program a memory locationPress the Lock/Enter button to enter Press the Lock/Enter buttonPress the Mode button to Choose one of the followingWhile recalling a stored memory location To recall a stored memory channel locationDisplay While de-programming a memory location To de-program a memory locationFlash on the display To scan channels Channel ScanYour microTALK radio can automatically scan channels Press the Mode button to proceed to set privacy If you press the Talk button while scanning, but more thanPrivacy Code Scan To scan privacy codesMode Functions Memory Location Scan To scan memory locationsPress the Mode button to proceed to other functions Is displayed To change call settingsVibrAlert and Call Alert Call Tone Settings To change a call tone settingPress the Mode button until Roger Beep Confirmation ToneKeystroke Tones To change keystroke tonesGeneral Specifications and FCC License General SpecificationsImportant Notice FCC License Required Product Service Product ServiceSafety and Trademark Acknowledgement Safety Information for microTALK RadiosWarranty Limited One-Year Warranty on Radios & Charger