Panasonic KX-PRL262, KX-PRD262 Bluetooth PIN, Liquid damage, Voice mail msg. via

Useful Information

Bluetooth PIN

Problem

I cannot remember the PIN.

Cause/solution

RChange the PIN using the following method. 1 MMENUN (right soft key) #619

2 *7000

3 Enter the new 4-digit PIN. a MOKN

4 Enter the new 4-digit PIN again. a MSAVEN a MOFFN

Voice mail

Problem

“Voice mail msg. via

phone co.” is shown on the handset display. How do I remove this message from the display?

Cause/solution

RThis notification is displayed when your service provider/ telephone company’s voice mail service (not the unit’s answering system) has recorded a message for you. Typically you can remove this notification from the display by listening to the message. To listen to the message, dial the voice mail number provided by your service provider/ telephone company (for most cases, this will be your own phone number), and follow the voice instructions. Depending on your service provider/telephone company, you may need to remove all messages from your voice mailbox to remove the notification. You can also remove this notification by pressing and holding # until the unit beeps.

Liquid damage

Problem

Liquid or other form of moisture has entered the handset/base unit.

Caution:

Cause/solution

RDisconnect the AC adaptor and telephone line cord from the base unit. Remove the batteries from the handset and leave to dry for at least 3 days. After the handset/base unit are completely dry, reconnect the AC adaptor and telephone line cord. Insert the batteries and charge fully before use. If the unit does not work properly, contact an authorized service center.

RTo avoid permanent damage, do not use a microwave oven to speed up the drying process.

68For assistance, please visit http://www.panasonic.com/help