Panasonic KX-PRD262, KX-PRL262 Important safety instructions, For best performance, Battery

Page 7

Important Information

RThis product is unable to make calls when:

the handset batteries need recharging or have failed.

there is a power failure.

Battery

RWe recommend using the batteries noted on page 3. USE ONLY rechargeable

Ni-MH batteries AAA (R03) size.

RDo not mix old and new batteries.

RDo not open or mutilate the batteries. Released electrolyte from the batteries is corrosive and may cause burns or injury to the eyes or skin. The electrolyte is toxic and may be harmful if swallowed.

RExercise care when handling the batteries. Do not allow conductive materials such as rings, bracelets, or keys to touch the batteries, otherwise a short circuit may cause the batteries and/or the conductive material to overheat and cause burns.

RCharge the batteries provided with or identified for use with this product only, in accordance with the instructions and limitations specified in this manual.

ROnly use a compatible base unit (or charger) to charge the batteries. Do not tamper with the base unit (or charger). Failure to follow these instructions may cause the batteries to swell or explode.

Attention:

A nickel metal hydride battery that is recyclable powers the product you have purchased.

Please call 1-800-8-BATTERY (1-800-822-8837) for information on how to recycle this battery.

Important safety instructions

When using your product, basic safety precautions should always be followed to reduce the risk of fire, electric shock, and injury to persons, including the following:

1.Do not use this product near water for example, near a bathtub, washbowl, kitchen sink, or laundry tub, in a wet basement or near a swimming pool.

2.Avoid using a telephone (other than a cordless type) during an electrical storm. There may be a remote risk of electric shock from lightning.

3.Do not use the telephone to report a gas leak in the vicinity of the leak.

4.Use only the power cord and batteries indicated in this manual. Do not dispose of batteries in a fire. They may explode. Check with local codes for possible special disposal instructions.

SAVE THESE INSTRUCTIONS

For best performance

Base unit location/avoiding noise

The base unit and other compatible Panasonic units use radio waves to communicate with each other.

RFor maximum coverage and noise-free communications, place your base unit:

at a convenient, high, and central location with no obstructions between the handset and base unit in an indoor environment.

away from electronic appliances such as TVs, radios, personal computers, wireless devices, or other phones.

facing away from radio frequency transmitters, such as external antennas of mobile phone cell stations. (Avoid putting the base unit on a bay window or near a window.)

RCoverage and voice quality depends on the local environmental conditions.

For assistance, please visit http://www.panasonic.com/help

7

Image 7
Contents Link-to-Cell Docking Station for Smartphone Link-to-Cell Docking Station for iPhoneThank you for purchasing a Panasonic product Table of Contents Model composition Accessory informationSupplied accessories Additional/replacement accessories Trademarks Bluetooth devices Other information Expanding your phone systemIntroduction For your safety Base unit location/avoiding noise Important safety instructionsBattery For best performanceEnvironment Other informationRoutine care Specifications Connections Setting upBattery installation Battery chargingDuring a power failure Intelligent eco modeBattery level Panasonic Ni-MH battery Performance supplied batteriesSpeaker ControlsHandset Base unitKX-PRD260 series Bluetooth pairing Mute Microphone USB port rear of unitCharging your smartphone KX-PRL260 seriesBooster on Use Cell1 in use Cell2 in use Line in use Display icons/IndicatorsHandset display items Meaning Within base unit range Out of base unit rangeDisplay language Language settingsDate and time Recording your greeting messageSetting the Smart function key Other settingsDialing mode Screen saver modeHandset Link to cell featurePairing a cellular phone Unpairing a cellular phoneSelecting which unit receives cellular calls Link to cell settingsRing as cell mode Auto connection to the Bluetooth devices cellular phonesTo turn on Cellular line only mode If you do not use the landlineConnecting/disconnecting the cellular phone manually Handset To connect/disconnectCellular line selection Changing the Bluetooth PINWhen you use the landline again Personal Identification NumberMaking landline calls Making cellular callsAnswering calls Useful features during aCall Handset clarity booster For call waiting or Call Waiting Caller ID service usersMute Flash for landline callsMbN Stop conference a Handset equalizerCall share Transferring calls, conference callsMbN Transfer to cell a Answering a 2nd callMbN Transfer from cell a Answering a 2nd call during a landline call IntercomMaking an intercom call Answering an intercom callStoring caller information to the phonebook PhonebookAdding phonebook entries Storing a redial list number to the phonebookErasing the character or number GroupsFinding and calling from a Phonebook entryErasing all entries Editing entriesErasing entries Erasing an entryEditing an entry Speed dialChain dial Adding phone numbers to speed dial keysViewing an entry/Making a call Menu list Display menu tree and direct command code tableMain menu Answering device New message Outgoing call Off Settings Ring count*1 RingsVoice Mail access*3 Battery checkAll Link to cell Add new device*5 for CellTone 2*6 Tone 4*7Handset *3 Ringer volume Settings Auto connect *1 MinMode *1 Off Cell line select Cellphone 1*5 Ring adjustments Ringer volumeSetting*4 Detector2*14 Memo alarm OnceAlarm1-5 Daily Weekly Time Off Caller ID auto Adjustment*1, *12 Manual Talking caller ID HandsetColor2 Display mode*16 Multi items Display Wallpaper Wallpaper1Clock Off Display color Color1Español Voice prompt*1 English Memo alarm Alarm1-5 OnceAdjustment*1, *12 Manual Change language Display EnglishOnce AlarmWeekly Call block Silent modeTurning silent mode on/off Selecting groups to bypass silent modeStoring a single phone number Setting the first ring for the call block listStoring unwanted callers Blocking incoming calls that have no phone numberRegistering a unit Other programmingProgramming Talking Caller ID Using Caller ID serviceCaller ID features Caller listMmenun a MbN Detail a Mselectn Caller ID number auto edit featureEditing a caller’s phone number Erasing selected caller informationErasing all caller information Copying phonebook from a cellular phone phonebook transfer Setting conversion codesPlaying music through the base unit’s speaker Playing music from a Bluetooth deviceSelecting a Bluetooth device to be used for playing music Bluetooth deviceKey Using the handset as a remote controlSetting text message SMS alert Text message SMS alertSelecting the alerting tone MbN On/Off a MselectnMbN Alert tone a Mselectn Memory capacity including your greeting message Using a pre-recorded greeting messageAnswering system for landline Greeting messageListening to messages from the message list Listening to messagesPlaying back the greeting message Operating the answering systemCalling back Caller ID subscribers only Advanced new message alerting featuresAudible message alert New message alert by a callEditing the set phone number Remote access codeTurning on/off the new message alert setting Remote operationTurning on the answering system remotely Using the answering system remotelyRemote commands Voice guidanceNumber of rings before the unit answers a call Answering system settingsFor voice mail service subscribers Call screeningAnswering System for Landline Listening to voice mail messages Voice mail service for landlineStoring the voice mail VM access number Voice mail VM tone detectionWhen Voice mail msg. via phone Cause/solution Error messagesDisplay message General use TroubleshootingRequires subscription to Caller ID Use rechargeable battery ProblemMenu list Making/answering calls, intercom Battery rechargeHandset or base unit does not ring Caller ID/Talking Caller ID Using Bluetooth devices Answering system Voice mail msg. via Bluetooth PINVoice mail Liquid damageFCC and other information FCC RF Exposure Warning Compatible with Guía Rápida Española Guía Rápida Española Guía Rápida Española Guía Rápida Española Guía Rápida Española Guía Rápida Española Guía Rápida Española Guía Rápida Española Guía Rápida Española Guía Rápida Española Or, send your request by E-mail to Customer servicesYou may also contact us directly at Fax Only Parts Labor One 1 Year Warranty For United States and Puerto RicoLimited Warranty Coverage Mail-In Service--Online Online Repair RequestWhen you ship the product Limited Warranty Limits And ExclusionsIndex Index Page For your future reference Read troubleshooting page in the Operating Instructions