Sangean Electronics RCR-5 manual Radio Alarm

5. Press the TIME SET button and then press the TUNING
up/down button to select the alarm sound. There are
RADIO ALARM	, and BUZZER ALARM	, 2 options.
a. If the BUZZER ALARM is selected – press the TIME SET
button to complete the setting.
b. If the RADIO ALARM is selected – press the TIME SET
button and then select the radio band and the frequency to
choose the alarm radio station. Then press the TIME SET
button to complete the setting.
c. The setting will automatically complete the setting after
30 seconds without any button pressed. But when the
ALARM RADIO is under setting, it will not complete
automatically until the TIME SET of POWER button
is pressed.
6. After the alarm is set, the alarm status will be shown for
6 seconds then will go back to the clock.
* HWS(Human Wake System): In buzzer alarm mode, the buzzer
sound will increase in volume for 1 minute, then followed by
1 minute silence, then repeat the cycle for 1 hour.
			GB

8