Editing Messages on the IC Recorder
Adding a Recording
OPR indicator
zREC/STOP
STOP
Adding a Recording to a Previously Recorded Message
You can add a recording to the message being played back.
The added recording will be placed after the current message and counted as a part of the message.
| During playback of Message 3 | ||||
| Message 3 | Message 4 |
|
| |
|
| After adding a recording | |||
|
|
|
|
|
|
| Message 3 |
| Message 4 |
| |
| Added recording | ||||
| Meeting at 2 | at Conference | |||
| on December 1. | room A |
1 During playback, press zREC/ STOP button for more than 1 second.
The "ADD REC" indicator appears and flashes three times on the display window.
The OPR indicator will turn red.
The new recording will be added at the end of the current message.
ADD REC
S P
0H 02M 43S
2 Press zREC/STOP button or STOP button to stop the recording.
Adding an Overwrite Recording during Playback
You can add an overwrite recording after the selected point in a recorded message. The part of the message after the selected point is deleted.
The starting point of an overwrite recording
| Message 2 | Message 3 |
|
|
|
|
|
The deleted part
of the message 2
Message 2 Message 3
Added overwrite recording in message 2
1 During playback, press zREC/ STOP button briefly.
| The "OVER WRITE?" indicator appears | Editing | |
| and flashes on the display window. | ||
|
| ||
| The OPR indicator will flash red. |
| |
| OVERWRITE? | Messages | |
| S P |
| |
| 0H 02M 43S | on the IC | |
|
| ||
2 | Press zREC/STOP button to start | ||
Recorder | |||
| recording | ||
|
|
The OPR indicator will turn red.
3 Press zREC/STOP button or STOP button to stop the recording.
Note
•The added message will be recorded in the same recording mode (SP or LP; see page 36) as the original message, regardless of the current recording mode setting.
•You cannot overwrite if the remaining memory of the “Memory Stick“ is not long enough. For more information, see “Troubleshooting“ (page 61).
21