Operation
Auto Operation
1. Unit start
Remote controller
Press on/off button (" 
") on the remote controller, unit starts.
2.Select operation mode
Press MODE button. For each press, operation mode
| TEMP | |
HEALTH |
| FAN |
|
| SWING |
MODE | H.AIR. | |
SLEEP | FRESH | |
CLOCK |
| SET |
TIMER |
|
|
LOCK | LIGHT | CODE RESET |
changes as follows: Remote controller:
AUTO COOL DRY FAN HEAT
Then Select Auto operation
3.Select temp.setting
Press TEMP. button
Every time the button is pressed, temp.setting increase 1oC,if kept depressed, it will increase rapidly
Every time the button is pressed, temp.setting decrease 1oC,if kept depressed, it will decrease rapidly
Select a desired temperature.
4.Fan speed selection
Press FAN button. For each press, fan speed changes as follows:
Remote controller:
LOW MED | HI | AUTO |
Air conditioner is running under displayed fan speed. When FAN is set to AUTO, the air conditioner automatically adjusts the fan speed according to room temperature.
5.Unit stop
Press on/off button ("
"), the unit stops.
About Auto Operation
Under the mode of auto operation, air conditioner will automatically select Cool or Heat operation according to room temperature.
10