Haier HSM09RU03, HSM12RU03, 2HUM18R03 manual Heat Operation, Remote controller

Operation

Heat Operation

1. Unit start

Remote controller Press on/off button (" ") on the remote controller, unit starts.

	TEMP
HEALTH		FAN
		SWING
MODE	H.AIR.
SLEEP	FRESH
CLOCK		SET
TIMER
LOCK	LIGHT	CODE RESET

2.Select operation mode

Press MODE button. For each press, operation mode changes as follows:

Remote controller:

AUTO COOL DRY FAN HEAT

Then Select HEAT operation

3.Select temp.setting

Press TEMP. button

Every time the button is pressed, temp.setting increase 1oC,if kept depressed, it will increase rapidly

Every time the button is pressed, temp.setting decrease 1oC,if kept depressed, it will decrease rapidly

Select a desired temperature.

4.Fan speed selection

Press FAN button. For each press, fan speed changes as follows:

Remote controller:

LOW MED HI AUTO

Air conditioner is running under displayed fan speed

IN HEAT mode, warm air will blow out after a short period of the time due to cold-draft prevention function.

When FAN is set to AUTO, the air conditioner automatically adjusts the fan speed according to room temperature.

5.Unit stop

Press on/off button (" "), the unit stops.

14