Ericsson LBI-38823D manual Turn on, Scn, Radio is in the Program mode

Page 13

SV	EDACS - The Service flag is normally on to indicate
	service. If a no service condition occurs the SV flag
	and the No Service flag will be illuminated.
	GE-MARC - The Service flag is normally off. If an
	unsuccessful attempt is made to access a GE-
	MARC System, both the SV and the NO flags will
	turn on.
	CONVENTIONAL - The Service flag remains off at
	all times while operating in Conventional mode.
SCN	The Scan flag is on when Scan is activated.

SThe "S" flag is used to indicate two conditions. The "S" flag is used in conjunction with the "PC" flag to indicate the radio is in the Special Call mode. The "S" flag is also used to indicate when a trunked group is scan enabled.

PC	The "PC" flag is illuminated with the "S" flag to
	indicate the radio is in the Special Call mode. When
	the "PC" flag is illuminated without the "S" flag, the
	radio is in the Program mode.

1The "1" flag is used only for radio logical ID display. When receiving a call, the most significant digit (0 or 1) of the originating radio’s ID will be displayed by the "1" flag. When on, the ID of the originating radio begins with a 1.

13

Image 13

Contents Ericssonz Page Table of Contents Emergency Operation Optional Dynamic Regrouping OptionalKeypad Lock System Model Only Introduction Dual Format PCS Radio Scan Model Dual Format PCS Radio System Model Description SwitchControls ON/OFF PTT ButtonScan Model Keypad SPC HOME/E SCAN-A/D STOLock IndicatorsAvailable on System Model radios only RCLStatus Indicators System And Group/Channel IndicatorsBSY Turn on Radio is in the Program modeSCN Low Battery Standard Tones Power-UpCarrier Control Timer Alert TonesCall Queued Edacs Only Call ReceivedAutokey Edacs Only System BusyOut Of Range/System Inoperative Error MessagesIntrinsically Safe Usage Option # Description Options and AccessoriesPictured on Options And Accessories Battery Packs FM Approved Battery PacksInstalling the Battery Pack Charging the Battery Packs Removing the Battery PackInstalling the Battery Pack Swivel Mount Removal and Replacement Rechargeable Battery Pack DisposalSwivel Mount Removal And Replacement When using two-way radios, remember the following rules Operating ProceduresOperating Tips Page NICKEL-CADMIUM Battery Warranty Current System selected Receiving a MessageSquelch Adjustment Using the Volume buttons, adjust the volume as necessarySending a Message Sending a Special Call Press and hold the SHFT/CLR buttonScan Model Radio Sending a Manually Entered Individual Call System Model RadioPage Sending a Manually Entered Interconnect Call Storing Individual And Interconnect Numbers Enter the desired storage location number Edacs Special Call Flowchart Scan Operation Enable/Disable ScanAdd/Delete Groups Wide Area And Priority System Scanning OptionalDynamic Regrouping Optional ProSoundDtmf Overdial Pressing the PTT bar to send the tones To enable an Emergency transmissionHOME/EMERGENCY KEY Definition Emergency Operation Optional Receiving An Emergency CallKeypad Lock System Model Only HomePage GE-MARC Operation Sending a Message Sending a Special Call Sending a Preprogrammed Special Call In Conference Call Sending a Manually Entered Individual Call Sending a Manually Entered Interconnect Call Page Storing Individual And Interconnect Numbers Page Number will be displayed GE-MARC Special Call Flowchart Wide Area System Scan Direct ModeReceiving a Message Sending a Message Add/Delete Channels Sending a Manually Entered Interconnect CallTo delete Channels from the scan list Scan must be disabled to add a channel to the scan listThis page intentionally left blank Conventional Mode Operation Sending a Message After all the digits have been keyed in, release the PTT bar Page Frequency Band OPERATOR’S Name Emergency Group System System Number Name TRK/CNV GRP/CHN GRP/CHN USE Warranty Emergency Numbers