1.Press the SPC key to put the radio into Special Call mode to send the stored call using the programmed special call tone set, otherwise the call will be sent using the selected group tone set. Press the# key to recall the individual call list or the * key to recall the interconnect call list. The screen will blank and a tone will sound.
2.Enter the desired storage location number (0-9).
3. | Press the RCL (shifted #) key If the number is from the individual call |
| list the last four digits of the tone set will be displayed. If the number |
| is from the interconnect call list, the last four digits of the telephone |
| number will be displayed. |
If the memory location is blank the radio will sound a low pitch tone after the RCL is pressed.
4.Individual - Once the desired individual call number is displayed , press and release the PTT to initiate the call. The radio performs the necessary signalling required to obtain a working channel.
Interconnect - Once the desired interconnect special call number is displayed,, press and release the PTT to initiate the call. The radio performs the necessary signalling required to obtain a working chan- nel.
5.Individual - When the signalling is successfully completed the "BSY" flag turns on and the Call Originate tones (three alert tone) sound. Press the PTT bar and speak directly into the microphone. Release the PTT bar as soon as you stop talking and wait for a reply.
Interconnect - When the signalling is successfully completed the "BSY" flag turns on and the proper DTMF tones will be sent and heard at the speaker. When someone answers, press thePTT bar and speak directly into the microphone. Release the PTT bar as soon as you stop talking. Messages cannot be received when the PTT bar is pressed.
6.The radio is out of range or the radio is inoperative when the signalling is unsuccessful, the "NO" and "SV" indicators are illuminated and a sequence of five beeps are heard at the speaker. Any subsequent attempt to initiate a call within the next 20 seconds will be ignored. The radio can be cleared from this mode by double clicking the SHFT/CLR button.
50