Ericsson LBI-38823D manual Home, Keypad Lock System Model Only

Page 39

1.Press and hold the Emergency key for the programmed duration. If programmed, an "E" will replace the 10’s digit in the System field and a alert tone will sound.

NOTE

The radio may be programmed for bothQuiet and/or Blind mode in which case no alert tone is heard and/or the display does not change respectively. If programmed to display an "E", the radio’s display will return to normal operation once the PTT is pressed.

2.The radio transmits an emergency message until an Emergency Channel Assignment is received.

3.Upon receipt, the radio begins operation on the programmed Sys- tem/Group (see the Home/Emergency Key Definitions section above).

4.Press the PTT bar and speak directly into the microphone in a normal voice.

5.Release the PTT bar when the transmission is complete and listen for a reply.

HOME

The radio can be programmed to automatically switch to a home System and/or Group by pressing and holding theHome/Emergency key for the programmed duration. The radio will also transmit an emergency mes- sage on the home System and/or Group if programmed (see the EMER- GENCY OPERATION section).

KEYPAD LOCK (SYSTEM Model Only)

The keypad can be locked at any time to prevent undesired key presses. To lock the keypad when it is in the unlocked state, press and release the LOCK (shifted 0) key. All buttons and keys except the VOLUME, PTT, HOME/EMER, SHIFT/CLR and LOCK (shifted 0) will now be inhibited. If the Emergency function of the HOME/EMER key is disabled, the

39

Image 39

Contents Ericssonz Page Table of Contents Dynamic Regrouping Optional Emergency Operation OptionalKeypad Lock System Model Only Introduction Dual Format PCS Radio Scan Model Dual Format PCS Radio System Model PTT Button SwitchDescription Controls ON/OFFScan Model Keypad STO HOME/ESPC SCAN-A/DRCL IndicatorsLock Available on System Model radios onlySystem And Group/Channel Indicators Status IndicatorsBSY Radio is in the Program mode Turn onSCN Alert Tones Standard Tones Power-UpLow Battery Carrier Control TimerSystem Busy Call ReceivedCall Queued Edacs Only Autokey Edacs OnlyError Messages Out Of Range/System InoperativeIntrinsically Safe Usage Options and Accessories Option # DescriptionPictured on Options And Accessories Battery Packs Battery Packs FM ApprovedInstalling the Battery Pack Charging the Battery Packs Removing the Battery PackInstalling the Battery Pack Swivel Mount Removal and Replacement Rechargeable Battery Pack DisposalSwivel Mount Removal And Replacement Operating Procedures When using two-way radios, remember the following rulesOperating Tips Page NICKEL-CADMIUM Battery Warranty Current System selected Receiving a MessageUsing the Volume buttons, adjust the volume as necessary Squelch AdjustmentSending a Message Press and hold the SHFT/CLR button Sending a Special CallScan Model Radio Sending a Manually Entered Individual Call System Model RadioPage Sending a Manually Entered Interconnect Call Storing Individual And Interconnect Numbers Enter the desired storage location number Edacs Special Call Flowchart Wide Area And Priority System Scanning Optional Enable/Disable Scan Scan Operation Add/Delete GroupsProSound Dynamic Regrouping OptionalDtmf Overdial Emergency Operation Optional Receiving An Emergency Call To enable an Emergency transmissionPressing the PTT bar to send the tones HOME/EMERGENCY KEY DefinitionKeypad Lock System Model Only HomePage GE-MARC Operation Sending a Message Sending a Special Call Sending a Preprogrammed Special Call In Conference Call Sending a Manually Entered Individual Call Sending a Manually Entered Interconnect Call Page Storing Individual And Interconnect Numbers Page Number will be displayed GE-MARC Special Call Flowchart Direct Mode Wide Area System ScanReceiving a Message Sending a Message Add/Delete Channels Sending a Manually Entered Interconnect CallTo delete Channels from the scan list Scan must be disabled to add a channel to the scan listThis page intentionally left blank Conventional Mode Operation Sending a Message After all the digits have been keyed in, release the PTT bar Page Frequency Band OPERATOR’S Name Emergency Group System System Number Name TRK/CNV GRP/CHN GRP/CHN USE Warranty Emergency Numbers