Ericsson LBI-38823D manual Sending a Manually Entered Individual Call

Page 45

display "SP" and the GRP (group) field will display the current selection number from the special call list, if no special calls are programmed then this field will be blank. Note this display is similar to the Special Call mode display except the "S" and "PC" icons are not illuminated.

2.The programmed call may now be sent following the procedure de- scribed in the section for the SCAN Model Radio.

Sending A Manually Entered Individual Call

1.Press the SPC key to put the radio into Special Call mode or "7" to put the radio into Conference Call mode. The SYStem field will display "SP" and the GRP (Group) field will display the last accessed call number from the preprogrammed Special Call selection. or will be blank if no Special Calls are programmed for this area. If the radio was put into Special Call mode the "S" and "PC" icons will be illumi- nated and if the radio was put into Conference Call mode the icons will be off.

2.Enter the tone set of the radio to be called. The first digit entered will cause the System field and the 10’s digit in the Group field to blank. The last digit entered will always be displayed in the 1’s digit of the Group display. Any previously entered digits will scroll left. Only four characters will be visible at a time with the leading character scrolling off the display upon each new key entry.

NOTE

To recall the last individual number entered manually from the key pad, press and hold the SHFT/CLR button and then press the RCL key.

3.Complete the tone set entry by pressing the # key. The # key indicates the digits entered are for an individual call. This will not be displayed but a tone will sound.

45

Image 45
Contents Ericssonz Page Table of Contents Dynamic Regrouping Optional Emergency Operation OptionalKeypad Lock System Model Only Introduction Dual Format PCS Radio Scan Model Dual Format PCS Radio System Model Description SwitchControls ON/OFF PTT ButtonScan Model Keypad SPC HOME/ESCAN-A/D STOLock IndicatorsAvailable on System Model radios only RCLSystem And Group/Channel Indicators Status IndicatorsBSY Radio is in the Program mode Turn onSCN Low Battery Standard Tones Power-UpCarrier Control Timer Alert TonesCall Queued Edacs Only Call ReceivedAutokey Edacs Only System BusyError Messages Out Of Range/System InoperativeIntrinsically Safe Usage Options and Accessories Option # DescriptionPictured on Options And Accessories Battery Packs Battery Packs FM ApprovedInstalling the Battery Pack Charging the Battery Packs Removing the Battery PackInstalling the Battery Pack Swivel Mount Removal and Replacement Rechargeable Battery Pack DisposalSwivel Mount Removal And Replacement Operating Procedures When using two-way radios, remember the following rulesOperating Tips Page NICKEL-CADMIUM Battery Warranty Current System selected Receiving a MessageUsing the Volume buttons, adjust the volume as necessary Squelch AdjustmentSending a Message Press and hold the SHFT/CLR button Sending a Special CallScan Model Radio Sending a Manually Entered Individual Call System Model RadioPage Sending a Manually Entered Interconnect Call Storing Individual And Interconnect Numbers Enter the desired storage location number Edacs Special Call Flowchart Scan Operation Enable/Disable ScanAdd/Delete Groups Wide Area And Priority System Scanning OptionalProSound Dynamic Regrouping OptionalDtmf Overdial Pressing the PTT bar to send the tones To enable an Emergency transmissionHOME/EMERGENCY KEY Definition Emergency Operation Optional Receiving An Emergency CallKeypad Lock System Model Only HomePage GE-MARC Operation Sending a Message Sending a Special Call Sending a Preprogrammed Special Call In Conference Call Sending a Manually Entered Individual Call Sending a Manually Entered Interconnect Call Page Storing Individual And Interconnect Numbers Page Number will be displayed GE-MARC Special Call Flowchart Direct Mode Wide Area System ScanReceiving a Message Sending a Message Add/Delete Channels Sending a Manually Entered Interconnect CallTo delete Channels from the scan list Scan must be disabled to add a channel to the scan listThis page intentionally left blank Conventional Mode Operation Sending a Message After all the digits have been keyed in, release the PTT bar Page Frequency Band OPERATOR’S Name Emergency Group System System Number Name TRK/CNV GRP/CHN GRP/CHN USE Warranty Emergency Numbers

LBI-38823D specifications

The Ericsson LBI-38823D is a significant component in the realm of telecommunications technology, reflecting the advancement in infrastructure aimed at enhancing mobile network performance. As part of Ericsson's extensive portfolio, this product is designed to support various network requirements and enable operators to optimize their services effectively.

One of the primary features of the LBI-38823D is its compatibility with LTE networks, providing seamless integration for operators looking to enhance their existing infrastructures. The unit is engineered to facilitate high-speed data transmission while ensuring low latency, which is crucial for applications requiring real-time performance such as video streaming and online gaming.

In terms of technology, the LBI-38823D supports advanced functionalities like MIMO (Multiple Input Multiple Output), which significantly boosts data throughput and signal quality. MIMO technology utilizes multiple antennas at the transmitter and receiver ends, enabling the simultaneous transmission of multiple data streams. This results in an increase in capacity and reliability, which are essential for meeting the demands of a growing user base and the rising expectations for mobile services.

Another noteworthy characteristic is its support for Carrier Aggregation, a technique that combines different frequency bands to enhance network efficiency and user experience. By aggregating carriers, the Ericsson LBI-38823D enables operators to maximize their spectrum usage, leading to improved peak data rates and overall network performance.

Moreover, the LBI-38823D is built with robust security features, ensuring that data transmission remains secure against potential breaches. As cybersecurity becomes increasingly critical in telecommunications, this product has been designed to protect both operator networks and end-user information.

Designed for scalability, the LBI-38823D allows operators to expand their networks easily as demand grows. This flexibility makes it an ideal choice for service providers looking to future-proof their investments and ensure long-term viability.

Overall, the Ericsson LBI-38823D is a state-of-the-art solution that embodies the convergence of innovation and reliability in telecommunications. With its advanced features, support for cutting-edge technologies, and emphasis on security and scalability, it is well-positioned to meet the evolving needs of the telecommunications industry while enhancing user experience.