Ericsson LBI-38823D manual Receiving a Message, Current System selected

Page 27

EDACS OPERATION

RECEIVING A MESSAGE

1.Turn the radio on by sliding the ON/OFF switch on the battery pack, to the ON position. A yellow area will be visible on the battery. After the radio has passed the power-up self test an optional tone will sound and the current System and Group will be displayed. If the unit does not pass the test, an error message will be displayed (see ERROR MESSAGES section) or the display will be blank.

2.JPress the SHIFT/CLR button and then use the SELECT buttons Ior to select an EDACS system. The SYStem display will indicate the

current System selected.

3.Use the SELECT buttons Ior Jto select the desired Group. The GRP display will indicate the current Group selected. The radio is now ready to receive messages.

4.INDIVIDUAL CALL - If an individual call (call directed only to your radio) is received, the radio unsquelches on the assigned channel and the "BSY" flag lights. If programmed on, the individual call received tones (one high followed by one low) will sound and the originator’s ID or just "id" (dependent upon programming) is displayed in the GRP and SYS fields.

GROUP CALL - When the radio receives a group call, it unsquelches on the assigned channel and lights the "BSY" flag. If programmed on, the group call received tone (single tone) will sound. The radio can also be programmed to display the Group name orginators ID in the GRP and SYS fields.

INTERCONNECT CALL - If an interconnect call (telephone call di- rected to your radio) is received, the radio unsquelches on the assigned channel and the "BSY" flag turns on. If programmed on, the intercon- nect call received tones (one high followed by one low) will sound. A "ph" will be displayed in the GRP field.

NOTE

The optional call received tones are programmed off by default.

27

Page 26 Page 28
Image 27
Page 26 Page 28
Contents Ericssonz Page Table of Contents Dynamic Regrouping Optional Emergency Operation OptionalKeypad Lock System Model Only Introduction Dual Format PCS Radio Scan Model Dual Format PCS Radio System Model PTT Button SwitchDescription Controls ON/OFFScan Model Keypad STO HOME/ESPC SCAN-A/DRCL IndicatorsLock Available on System Model radios onlySystem And Group/Channel Indicators Status IndicatorsBSY Radio is in the Program mode Turn onSCN Alert Tones Standard Tones Power-UpLow Battery Carrier Control TimerSystem Busy Call ReceivedCall Queued Edacs Only Autokey Edacs OnlyError Messages Out Of Range/System InoperativeIntrinsically Safe Usage Options and Accessories Option # DescriptionPictured on Options And Accessories Battery Packs Battery Packs FM ApprovedInstalling the Battery Pack Charging the Battery Packs Removing the Battery PackInstalling the Battery Pack Swivel Mount Removal and Replacement Rechargeable Battery Pack DisposalSwivel Mount Removal And Replacement Operating Procedures When using two-way radios, remember the following rulesOperating Tips Page NICKEL-CADMIUM Battery Warranty Current System selected Receiving a MessageUsing the Volume buttons, adjust the volume as necessary Squelch AdjustmentSending a Message Press and hold the SHFT/CLR button Sending a Special CallScan Model Radio Sending a Manually Entered Individual Call System Model RadioPage Sending a Manually Entered Interconnect Call Storing Individual And Interconnect Numbers Enter the desired storage location number Edacs Special Call Flowchart Wide Area And Priority System Scanning Optional Enable/Disable ScanScan Operation Add/Delete GroupsProSound Dynamic Regrouping OptionalDtmf Overdial Emergency Operation Optional Receiving An Emergency Call To enable an Emergency transmissionPressing the PTT bar to send the tones HOME/EMERGENCY KEY DefinitionKeypad Lock System Model Only HomePage GE-MARC Operation Sending a Message Sending a Special Call Sending a Preprogrammed Special Call In Conference Call Sending a Manually Entered Individual Call Sending a Manually Entered Interconnect Call Page Storing Individual And Interconnect Numbers Page Number will be displayed GE-MARC Special Call Flowchart Direct Mode Wide Area System ScanReceiving a Message Sending a Message Add/Delete Channels Sending a Manually Entered Interconnect CallTo delete Channels from the scan list Scan must be disabled to add a channel to the scan listThis page intentionally left blank Conventional Mode Operation Sending a Message After all the digits have been keyed in, release the PTT bar Page Frequency Band OPERATOR’S Name Emergency Group System System Number Name TRK/CNV GRP/CHN GRP/CHN USE Warranty Emergency Numbers

LBI-38823D specifications

The Ericsson LBI-38823D is a significant component in the realm of telecommunications technology, reflecting the advancement in infrastructure aimed at enhancing mobile network performance. As part of Ericsson's extensive portfolio, this product is designed to support various network requirements and enable operators to optimize their services effectively.

One of the primary features of the LBI-38823D is its compatibility with LTE networks, providing seamless integration for operators looking to enhance their existing infrastructures. The unit is engineered to facilitate high-speed data transmission while ensuring low latency, which is crucial for applications requiring real-time performance such as video streaming and online gaming.

In terms of technology, the LBI-38823D supports advanced functionalities like MIMO (Multiple Input Multiple Output), which significantly boosts data throughput and signal quality. MIMO technology utilizes multiple antennas at the transmitter and receiver ends, enabling the simultaneous transmission of multiple data streams. This results in an increase in capacity and reliability, which are essential for meeting the demands of a growing user base and the rising expectations for mobile services.

Another noteworthy characteristic is its support for Carrier Aggregation, a technique that combines different frequency bands to enhance network efficiency and user experience. By aggregating carriers, the Ericsson LBI-38823D enables operators to maximize their spectrum usage, leading to improved peak data rates and overall network performance.

Moreover, the LBI-38823D is built with robust security features, ensuring that data transmission remains secure against potential breaches. As cybersecurity becomes increasingly critical in telecommunications, this product has been designed to protect both operator networks and end-user information.

Designed for scalability, the LBI-38823D allows operators to expand their networks easily as demand grows. This flexibility makes it an ideal choice for service providers looking to future-proof their investments and ensure long-term viability.

Overall, the Ericsson LBI-38823D is a state-of-the-art solution that embodies the convergence of innovation and reliability in telecommunications. With its advanced features, support for cutting-edge technologies, and emphasis on security and scalability, it is well-positioned to meet the evolving needs of the telecommunications industry while enhancing user experience.
Top Page Image Contents