Ericsson LBI-38823D manual GE-MARC Operation

Page 41

GE-MARC OPERATION

RECEIVING A MESSAGE

1.Turn the radio on by sliding the ON/OFF switch on the battery pack, to the ON position. A yellow area will be visible on the battery. After the radio has passed the power-up self test an optional tone will sound and the current System and Channel will be displayed. If the unit does not pass the test, an error message will be displayed (see the ERROR MESSAGES section), or the display will be blank.

2.Press the SHIFT/CLR button and then use the SELECT buttons s or tto select a GE-MARC system. The SYStem display will indicate the current System selected. If the GRP/SYS icons are lit when a system is selected, this indicates the default mode for that system is Group mode. However, if the SPC icon is lit then this indicates that no groups are programmed for that system and therefore the default mode is the Special Call mode.

3.Use the SELECT buttons s or tto select the desired Group or Special Call Item. The Group or Special Call items will be displayed in the right field. If the radio is in the Special Call but no Special Call Items are programmed for that system then the left field will show SP while the right field will be blank. The radio is now ready to receive messages.

4.INDIVIDUAL CALL - If an individual call (call directed only to your radio) is received, the radio unsquelches on the assigned channel and the "BSY" flag lights. The individual call received tones (one high followed by one low) will sound and "id" (for individual call) is displayed in the GRP field. The call received tones may be programmed off.

GROUP CALL - When the radio receives a group call, it unsquelches on the assigned channel and lights the "BSY" turns on. The group call received tone (single tone) will sound (unless programmed off).

INTERCONNECT CALL - If an interconnect call (telephone call di- rected to your radio) is received, the radio unsquelches on the assigned channel and the "BSY" flag turns on. If the received tone set was the selected group tone set, then the radio will behave as it does when it receives a group call from another radio. If the tone set was the selected system’s individual call tone set, the radio will behave as if it had received an individual call from another radio.

41

Page 40 Page 42
Image 41
Page 40 Page 42
Contents Ericssonz Page Table of Contents Keypad Lock System Model Only Dynamic Regrouping OptionalEmergency Operation Optional Introduction Dual Format PCS Radio Scan Model Dual Format PCS Radio System Model Description SwitchControls ON/OFF PTT ButtonScan Model Keypad SPC HOME/ESCAN-A/D STOLock IndicatorsAvailable on System Model radios only RCLBSY System And Group/Channel IndicatorsStatus Indicators SCN Radio is in the Program modeTurn on Low Battery Standard Tones Power-UpCarrier Control Timer Alert TonesCall Queued Edacs Only Call ReceivedAutokey Edacs Only System BusyIntrinsically Safe Usage Error MessagesOut Of Range/System Inoperative Pictured on Options and AccessoriesOption # Description Options And Accessories Installing the Battery Pack Battery PacksBattery Packs FM Approved Charging the Battery Packs Removing the Battery PackInstalling the Battery Pack Swivel Mount Removal and Replacement Rechargeable Battery Pack DisposalSwivel Mount Removal And Replacement Operating Tips Operating ProceduresWhen using two-way radios, remember the following rules Page NICKEL-CADMIUM Battery Warranty Current System selected Receiving a MessageSending a Message Using the Volume buttons, adjust the volume as necessarySquelch Adjustment Scan Model Radio Press and hold the SHFT/CLR buttonSending a Special Call Sending a Manually Entered Individual Call System Model RadioPage Sending a Manually Entered Interconnect Call Storing Individual And Interconnect Numbers Enter the desired storage location number Edacs Special Call Flowchart Scan Operation Enable/Disable ScanAdd/Delete Groups Wide Area And Priority System Scanning OptionalDtmf Overdial ProSoundDynamic Regrouping Optional Pressing the PTT bar to send the tones To enable an Emergency transmission HOME/EMERGENCY KEY Definition Emergency Operation Optional Receiving An Emergency CallKeypad Lock System Model Only HomePage GE-MARC Operation Sending a Message Sending a Special Call Sending a Preprogrammed Special Call In Conference Call Sending a Manually Entered Individual Call Sending a Manually Entered Interconnect Call Page Storing Individual And Interconnect Numbers Page Number will be displayed GE-MARC Special Call Flowchart Receiving a Message Direct ModeWide Area System Scan Sending a Message Add/Delete Channels Sending a Manually Entered Interconnect CallTo delete Channels from the scan list Scan must be disabled to add a channel to the scan listThis page intentionally left blank Conventional Mode Operation Sending a Message After all the digits have been keyed in, release the PTT bar Page Frequency Band OPERATOR’S Name Emergency Group System System Number Name TRK/CNV GRP/CHN GRP/CHN USE Warranty Emergency Numbers
Top Page Image Contents