6.When the call is complete, double click the SHIFT/CLR button to exit the Special Call mode and return to the normal system/group display.
Storing Individual And Interconnect Numbers
1.Press the SPC key to put the radio into Special Call mode. The SYStem field will display "SP" and the GRP (Group) field will display the last accessed call number from the preprogrammed Special Call list. The "S" and "PC" icons will also be illuminated while in the Special Call mode.
2.Enter the ID number or telephone number of the radio to be stored. The first digit entered will cause System display and the 10’s digit in the Group field to blank. The last digit entered will always be displayed in the 1’s digit of the Group field. Any previously entered digits will scroll left. Only four characters will be visible at a time with the leading character scrolling off the display upon each new key entry.
NOTE
To recall the last individual or interconnect number entered manually from the key pad, press and hold theSHFT/CLR button and then press the RCL key.
3.Complete the entry by pressing the # key for individual numbers and the * key for telephone interconnect numbers. The # key indicates the digits entered are for an individual call and * key indicates the digits are for an interconnect call. They will not be displayed but a tone will sound.
4.Enter a digit between 0 and 9 to select a storage location. The storage location will not be displayed, but a tone will sound. There are 10 storage locations for individual numbers and 10 storage locations for interconnect numbers.
33