Ericsson LBI-38823D manual Scan must be disabled to add a channel to the scan list

Page 55

1.Select the desired channel to be added. If the current channel is already included in the scan list, the "S" icon will be illuminated.

NOTE

Scan must be disabled to add a channel to the scan list.

2.To add the channel to the scan list, press the SHIFT/CLR key and then press the SCAN key. The "S" icon will illuminate and the channel will be included.

To delete Channels from the scan list:

1.Select the desired channel to be deleted. If the current channel is already included in the scan list, the "S" icon will be illuminated.

2.To delete the channel from the scan list, press the SHIFT/CLR button and then press the SCAN key. The "S" icon will turn off and the channel will be removed from the scan list.

55

Image 55

Contents Ericssonz Page Table of Contents Emergency Operation Optional Dynamic Regrouping OptionalKeypad Lock System Model Only Introduction Dual Format PCS Radio Scan Model Dual Format PCS Radio System Model PTT Button SwitchDescription Controls ON/OFFScan Model Keypad STO HOME/ESPC SCAN-A/DRCL IndicatorsLock Available on System Model radios onlyStatus Indicators System And Group/Channel IndicatorsBSY Turn on Radio is in the Program modeSCN Alert Tones Standard Tones Power-UpLow Battery Carrier Control TimerSystem Busy Call ReceivedCall Queued Edacs Only Autokey Edacs OnlyOut Of Range/System Inoperative Error MessagesIntrinsically Safe Usage Option # Description Options and AccessoriesPictured on Options And Accessories Battery Packs FM Approved Battery PacksInstalling the Battery Pack Charging the Battery Packs Removing the Battery PackInstalling the Battery Pack Swivel Mount Removal and Replacement Rechargeable Battery Pack DisposalSwivel Mount Removal And Replacement When using two-way radios, remember the following rules Operating ProceduresOperating Tips Page NICKEL-CADMIUM Battery Warranty Current System selected Receiving a MessageSquelch Adjustment Using the Volume buttons, adjust the volume as necessarySending a Message Sending a Special Call Press and hold the SHFT/CLR buttonScan Model Radio Sending a Manually Entered Individual Call System Model RadioPage Sending a Manually Entered Interconnect Call Storing Individual And Interconnect Numbers Enter the desired storage location number Edacs Special Call Flowchart Wide Area And Priority System Scanning Optional Enable/Disable ScanScan Operation Add/Delete GroupsDynamic Regrouping Optional ProSoundDtmf Overdial Emergency Operation Optional Receiving An Emergency Call To enable an Emergency transmissionPressing the PTT bar to send the tones HOME/EMERGENCY KEY DefinitionKeypad Lock System Model Only HomePage GE-MARC Operation Sending a Message Sending a Special Call Sending a Preprogrammed Special Call In Conference Call Sending a Manually Entered Individual Call Sending a Manually Entered Interconnect Call Page Storing Individual And Interconnect Numbers Page Number will be displayed GE-MARC Special Call Flowchart Wide Area System Scan Direct Mode Receiving a Message Sending a Message Add/Delete Channels Sending a Manually Entered Interconnect CallTo delete Channels from the scan list Scan must be disabled to add a channel to the scan listThis page intentionally left blank Conventional Mode Operation Sending a Message After all the digits have been keyed in, release the PTT bar Page Frequency Band OPERATOR’S Name Emergency Group System System Number Name TRK/CNV GRP/CHN GRP/CHN USE Warranty Emergency Numbers