Ericsson LBI-38823D Press and hold the SHFT/CLR button, Sending a Special Call, Scan Model Radio

Page 29

1.Press and hold the SHFT/CLR button.

2.Use the VOLUME Ior Jbuttons to adjust the squelch. Pressing the VOLUME s will open the squelch and pressing the VOLUMEJ will close the squelch.

SENDING A SPECIAL CALL

SCAN Model Radio

1.Press the SPC key to put the radio into Special Call mode and provide access to a preprogrammed special call list. Each selection from the list is preprogrammed with either an individual number or an intercon- nect number. The SYStem field will display"SP" and the GRP (Group) field will display the current selection number from the special call list. The "S" and "PC" icons will also be illuminated while in the Special Call mode.

2.Press the SELECT Ior Jbuttons to increment or decrement through the special call list.

NOTE

To display the last four digits of the individual or interconnect number currently selected, press and hold the SHFT/CLR button and then press the SPC key.

3.Individual - Once the desired individual special call number is displayed in the GRP (Group) field, press and hold the PTT to initiate the call. The radio performs the necessary signalling required to obtain a working channel.

Interconnect - Once the desired interconnect special call number is displayed in the GRP (Group) field, press and release thePTT to initiate the call. The radio performs the necessary signalling required to obtain a working channel.

4.Individual - When the signalling is successfully completed the "TX" and "BSY" flags turn on and the Call Originate tone sounds. Speak directly into the microphone. Release the PTT bar as soon as you stop talking and wait for a reply.

29

Image 29

Contents Ericssonz Page Table of Contents Keypad Lock System Model Only Dynamic Regrouping OptionalEmergency Operation Optional Introduction Dual Format PCS Radio Scan Model Dual Format PCS Radio System Model Description SwitchControls ON/OFF PTT ButtonScan Model Keypad SPC HOME/ESCAN-A/D STOLock IndicatorsAvailable on System Model radios only RCLBSY System And Group/Channel IndicatorsStatus Indicators SCN Radio is in the Program modeTurn on Low Battery Standard Tones Power-UpCarrier Control Timer Alert TonesCall Queued Edacs Only Call ReceivedAutokey Edacs Only System BusyIntrinsically Safe Usage Error MessagesOut Of Range/System Inoperative Pictured on Options and AccessoriesOption # Description Options And Accessories Installing the Battery Pack Battery PacksBattery Packs FM Approved Charging the Battery Packs Removing the Battery PackInstalling the Battery Pack Swivel Mount Removal and Replacement Rechargeable Battery Pack DisposalSwivel Mount Removal And Replacement Operating Tips Operating ProceduresWhen using two-way radios, remember the following rules Page NICKEL-CADMIUM Battery Warranty Current System selected Receiving a MessageSending a Message Using the Volume buttons, adjust the volume as necessarySquelch Adjustment Scan Model Radio Press and hold the SHFT/CLR buttonSending a Special Call Sending a Manually Entered Individual Call System Model RadioPage Sending a Manually Entered Interconnect Call Storing Individual And Interconnect Numbers Enter the desired storage location number Edacs Special Call Flowchart Scan Operation Enable/Disable ScanAdd/Delete Groups Wide Area And Priority System Scanning OptionalDtmf Overdial ProSoundDynamic Regrouping Optional Pressing the PTT bar to send the tones To enable an Emergency transmissionHOME/EMERGENCY KEY Definition Emergency Operation Optional Receiving An Emergency CallKeypad Lock System Model Only HomePage GE-MARC Operation Sending a Message Sending a Special Call Sending a Preprogrammed Special Call In Conference Call Sending a Manually Entered Individual Call Sending a Manually Entered Interconnect Call Page Storing Individual And Interconnect Numbers Page Number will be displayed GE-MARC Special Call Flowchart Receiving a Message Direct ModeWide Area System Scan Sending a Message Add/Delete Channels Sending a Manually Entered Interconnect CallTo delete Channels from the scan list Scan must be disabled to add a channel to the scan listThis page intentionally left blank Conventional Mode Operation Sending a Message After all the digits have been keyed in, release the PTT bar Page Frequency Band OPERATOR’S Name Emergency Group System System Number Name TRK/CNV GRP/CHN GRP/CHN USE Warranty Emergency Numbers