Ericsson LBI-38823D manual NICKEL-CADMIUM Battery Warranty

Page 26

NICKEL-CADMIUM BATTERY WARRANTY

A.Ericsson Inc. (hereinafter "Seller") warrants to the original pur- chaser for use (hereinafter "Buyer") that nickel-cadmium batteries supplied by Seller shall be free from defects in material and workmanship, and shall conform to its published specifications for a period of twelve (12) months from the date of purchase.

B.For purposes of this warranty, batteries shall be deemed defective if (1) the battery capacity is less than 80% of rated capacity, or (2) the battery develops leakage.

C.If any battery fails to meet the foregoing warranty, Seller shall correct the failure by issuing a replacement battery upon receipt of the defective battery at an Authorized Service Center (ASC).. To obtain the name and address of a ASC, ask your salesperson, consult the Yellow Pages, or call the number printed at the bottom of this page.

D.Replacement batteries shall be warranted only for the remaining unexpired warranty period of the original battery. This warranty becomes void if:

(1)The battery has been subjected to any kind of misuse, detrimental exposure, or has been involved in an accident.

(2)The battery is used in equipment or service other than the radio equipment for which it is specified.

E.The preceding paragraphs set forth the exclusive remedies for claims (except as to title) based upon defects in or non-conformity of any battery, whether the claim is in contract, warranty, tort (including negligence), strict liability or otherwise, and however instituted. Upon the expiration of the warranty period, all such liability shall terminate. The foregoing warranties are exclusive and in lieu of all other warranties, whether oral, written, expressed, implied or statutory. NO IMPLIED OR STATUTORY WARRAN-

TIES OF MERCHANTABILITY OR FITNESS FOR PARTICULAR PURPOSE SHALL APPLY. IN NO EVENT SHALL THE COM- PANY BE LIABLE FOR ANY INCIDENTAL, CONSEQUENTIAL, SPECIAL, INDIRECT OR EXEMPLARY DAMAGES.

This warranty applies only within the United States. 1-800-528-7711 (Outside USA, 804-528-7711).

ECX-841C

26

Page 25 Page 27
Image 26
Page 25 Page 27
Contents Ericssonz Page Table of Contents Keypad Lock System Model Only Dynamic Regrouping OptionalEmergency Operation Optional Introduction Dual Format PCS Radio Scan Model Dual Format PCS Radio System Model Controls ON/OFF SwitchDescription PTT ButtonScan Model Keypad SCAN-A/D HOME/ESPC STOAvailable on System Model radios only IndicatorsLock RCLBSY System And Group/Channel IndicatorsStatus Indicators SCN Radio is in the Program modeTurn on Carrier Control Timer Standard Tones Power-UpLow Battery Alert TonesAutokey Edacs Only Call ReceivedCall Queued Edacs Only System BusyIntrinsically Safe Usage Error MessagesOut Of Range/System Inoperative Pictured on Options and AccessoriesOption # Description Options And Accessories Installing the Battery Pack Battery PacksBattery Packs FM Approved Removing the Battery Pack Charging the Battery PacksInstalling the Battery Pack Rechargeable Battery Pack Disposal Swivel Mount Removal and ReplacementSwivel Mount Removal And Replacement Operating Tips Operating ProceduresWhen using two-way radios, remember the following rules Page NICKEL-CADMIUM Battery Warranty Receiving a Message Current System selectedSending a Message Using the Volume buttons, adjust the volume as necessarySquelch Adjustment Scan Model Radio Press and hold the SHFT/CLR buttonSending a Special Call System Model Radio Sending a Manually Entered Individual CallPage Sending a Manually Entered Interconnect Call Storing Individual And Interconnect Numbers Enter the desired storage location number Edacs Special Call Flowchart Add/Delete Groups Enable/Disable ScanScan Operation Wide Area And Priority System Scanning OptionalDtmf Overdial ProSoundDynamic Regrouping Optional HOME/EMERGENCY KEY Definition To enable an Emergency transmissionPressing the PTT bar to send the tones Emergency Operation Optional Receiving An Emergency CallHome Keypad Lock System Model OnlyPage GE-MARC Operation Sending a Message Sending a Special Call Sending a Preprogrammed Special Call In Conference Call Sending a Manually Entered Individual Call Sending a Manually Entered Interconnect Call Page Storing Individual And Interconnect Numbers Page Number will be displayed GE-MARC Special Call Flowchart Receiving a Message Direct ModeWide Area System Scan Sending a Message Sending a Manually Entered Interconnect Call Add/Delete ChannelsScan must be disabled to add a channel to the scan list To delete Channels from the scan listThis page intentionally left blank Conventional Mode Operation Sending a Message After all the digits have been keyed in, release the PTT bar Page Frequency Band OPERATOR’S Name Emergency Group System System Number Name TRK/CNV GRP/CHN GRP/CHN USE Warranty Emergency Numbers

LBI-38823D specifications

The Ericsson LBI-38823D is a significant component in the realm of telecommunications technology, reflecting the advancement in infrastructure aimed at enhancing mobile network performance. As part of Ericsson's extensive portfolio, this product is designed to support various network requirements and enable operators to optimize their services effectively.

One of the primary features of the LBI-38823D is its compatibility with LTE networks, providing seamless integration for operators looking to enhance their existing infrastructures. The unit is engineered to facilitate high-speed data transmission while ensuring low latency, which is crucial for applications requiring real-time performance such as video streaming and online gaming.

In terms of technology, the LBI-38823D supports advanced functionalities like MIMO (Multiple Input Multiple Output), which significantly boosts data throughput and signal quality. MIMO technology utilizes multiple antennas at the transmitter and receiver ends, enabling the simultaneous transmission of multiple data streams. This results in an increase in capacity and reliability, which are essential for meeting the demands of a growing user base and the rising expectations for mobile services.

Another noteworthy characteristic is its support for Carrier Aggregation, a technique that combines different frequency bands to enhance network efficiency and user experience. By aggregating carriers, the Ericsson LBI-38823D enables operators to maximize their spectrum usage, leading to improved peak data rates and overall network performance.

Moreover, the LBI-38823D is built with robust security features, ensuring that data transmission remains secure against potential breaches. As cybersecurity becomes increasingly critical in telecommunications, this product has been designed to protect both operator networks and end-user information.

Designed for scalability, the LBI-38823D allows operators to expand their networks easily as demand grows. This flexibility makes it an ideal choice for service providers looking to future-proof their investments and ensure long-term viability.

Overall, the Ericsson LBI-38823D is a state-of-the-art solution that embodies the convergence of innovation and reliability in telecommunications. With its advanced features, support for cutting-edge technologies, and emphasis on security and scalability, it is well-positioned to meet the evolving needs of the telecommunications industry while enhancing user experience.
Top Page Image Contents