NOTE
If the "Call Retry" option is active, the radio will try the channel at twenty second intervals for five minutes before returning to the normal System/Group display.
5.When someone answers, press the PTT bar and speak directly into the microphone. Release the PTT bar as soon as you stop talking. Messages cannot be received when the PTT bar is pressed.
6.When the call is complete, double click the SHIFT/CLR button to exit the Special Call mode and return to the normal system/group display.
Storing Individual And Interconnect Numbers
1.Press the SPC key to put the radio into Special Call mode. or "7" to put the radio into Conference Call mode. The SYStem field will display "SP" and the GRP (Group) field will display the last accessed call number from the preprogrammed Special Call selection or will be blank if no Special Calls are programmed for this area. If the radio was put into Special Call mode the "S" and "PC" icons will be illuminated and if the radio was put into Conference Call mode the icons will be off.
2.Enter the tone set (individual call) or telephone number to be stored. The first digit entered will cause the System display and the 10’s digit in the Group field to blank. The last digit entered will always be displayed in the 1’s digit of the Group field. Any previously entered digits will scroll left. Only four characters will be visible at a time with the leading character scrolling off the display upon each new key entry.
48