Ericsson LBI-38823D manual GE-MARC Special Call Flowchart

Page 51

All channels are busy when the signalling is unsuccessful and a one second low frequency tone is heard at the speaker. The call will not be retried automatically.

NOTE

If the "Call Retry" option is active, the radio will try the channel at twenty second intervals for five minutes before returning to the normal System/Group display.

7.When the call is complete, double click the SHIFT/CLR button to exit the Special Call mode an return to the normal System/Group display.

Figure 11 - GE-MARC Special Call Flowchart

51

Image 51

Contents Ericssonz Page Table of Contents Dynamic Regrouping Optional Emergency Operation OptionalKeypad Lock System Model Only Introduction Dual Format PCS Radio Scan Model Dual Format PCS Radio System Model PTT Button SwitchDescription Controls ON/OFFScan Model Keypad STO HOME/ESPC SCAN-A/DRCL IndicatorsLock Available on System Model radios onlySystem And Group/Channel Indicators Status IndicatorsBSY Radio is in the Program mode Turn onSCN Alert Tones Standard Tones Power-UpLow Battery Carrier Control TimerSystem Busy Call ReceivedCall Queued Edacs Only Autokey Edacs OnlyError Messages Out Of Range/System InoperativeIntrinsically Safe Usage Options and Accessories Option # DescriptionPictured on Options And Accessories Battery Packs Battery Packs FM ApprovedInstalling the Battery Pack Charging the Battery Packs Removing the Battery PackInstalling the Battery Pack Swivel Mount Removal and Replacement Rechargeable Battery Pack DisposalSwivel Mount Removal And Replacement Operating Procedures When using two-way radios, remember the following rulesOperating Tips Page NICKEL-CADMIUM Battery Warranty Current System selected Receiving a MessageUsing the Volume buttons, adjust the volume as necessary Squelch AdjustmentSending a Message Press and hold the SHFT/CLR button Sending a Special CallScan Model Radio Sending a Manually Entered Individual Call System Model RadioPage Sending a Manually Entered Interconnect Call Storing Individual And Interconnect Numbers Enter the desired storage location number Edacs Special Call Flowchart Wide Area And Priority System Scanning Optional Enable/Disable ScanScan Operation Add/Delete GroupsProSound Dynamic Regrouping OptionalDtmf Overdial Emergency Operation Optional Receiving An Emergency Call To enable an Emergency transmissionPressing the PTT bar to send the tones HOME/EMERGENCY KEY DefinitionKeypad Lock System Model Only HomePage GE-MARC Operation Sending a Message Sending a Special Call Sending a Preprogrammed Special Call In Conference Call Sending a Manually Entered Individual Call Sending a Manually Entered Interconnect Call Page Storing Individual And Interconnect Numbers Page Number will be displayed GE-MARC Special Call Flowchart Direct Mode Wide Area System ScanReceiving a Message Sending a Message Add/Delete Channels Sending a Manually Entered Interconnect CallTo delete Channels from the scan list Scan must be disabled to add a channel to the scan listThis page intentionally left blank Conventional Mode Operation Sending a Message After all the digits have been keyed in, release the PTT bar Page Frequency Band OPERATOR’S Name Emergency Group System System Number Name TRK/CNV GRP/CHN GRP/CHN USE Warranty Emergency Numbers