Ericsson LBI-38823D manual System Model Radio, Sending a Manually Entered Individual Call

Page 30

Interconnect - When the signalling is successfully completed the "BSY" flag turns on and the proper DTMF tones will be sent and heard at the speaker. When someone answers, press thePTT bar and speak directly into the microphone. Release the PTT bar as soon as you stop talking. Messages cannot be received when the PTT bar is pressed.

If the signalling is unsuccessful, the radio will remain in the the Special Call Mode and sound the appropriate alert tone(s).

5.When the call is complete, double click the SHIFT/CLR button to exit the Special Call mode and return to the normal System/Group display.

SYSTEM Model Radio

The System radio may also initiate a call from the Special Call selection as described in the SCAN Model Radio section. In addition, the System radio is capable of the following from the Special Call Mode:

∙Storing and/or recalling up to 10 individual and 10 interconnect numbers in 2 separate storage locations. These numbers are manually entered from the keypad.

∙Initiating individual and interconnect calls that are manually entered from the keypad.

Each of these features are discussed in detail in the following sections.

Sending A Manually Entered Individual Call

1.Press the SPC key to put the radio into Special Call mode. The SYStem field will display "SP" and the GRP (Group) field will display the last accessed Special call number from the preprogrammed Spe- cial Call selection. The "S" and "PC" icons will also be illuminated while in the Special Call Mode.

2.Enter the ID number of the radio to be called. The first digit entered will cause the System field and the 10’s digit in the Group field to blank. The last digit entered will always be displayed in the 1’s digit of the Group display. Any previously entered digits will scroll left. Only four

30

Image 30

Contents Ericssonz Page Table of Contents Dynamic Regrouping Optional Emergency Operation OptionalKeypad Lock System Model Only Introduction Dual Format PCS Radio Scan Model Dual Format PCS Radio System Model Controls ON/OFF SwitchDescription PTT ButtonScan Model Keypad SCAN-A/D HOME/ESPC STOAvailable on System Model radios only IndicatorsLock RCLSystem And Group/Channel Indicators Status IndicatorsBSY Radio is in the Program mode Turn onSCN Carrier Control Timer Standard Tones Power-UpLow Battery Alert TonesAutokey Edacs Only Call ReceivedCall Queued Edacs Only System BusyError Messages Out Of Range/System InoperativeIntrinsically Safe Usage Options and Accessories Option # DescriptionPictured on Options And Accessories Battery Packs Battery Packs FM ApprovedInstalling the Battery Pack Removing the Battery Pack Charging the Battery PacksInstalling the Battery Pack Rechargeable Battery Pack Disposal Swivel Mount Removal and ReplacementSwivel Mount Removal And Replacement Operating Procedures When using two-way radios, remember the following rulesOperating Tips Page NICKEL-CADMIUM Battery Warranty Receiving a Message Current System selectedUsing the Volume buttons, adjust the volume as necessary Squelch AdjustmentSending a Message Press and hold the SHFT/CLR button Sending a Special CallScan Model Radio System Model Radio Sending a Manually Entered Individual CallPage Sending a Manually Entered Interconnect Call Storing Individual And Interconnect Numbers Enter the desired storage location number Edacs Special Call Flowchart Add/Delete Groups Enable/Disable ScanScan Operation Wide Area And Priority System Scanning OptionalProSound Dynamic Regrouping OptionalDtmf Overdial HOME/EMERGENCY KEY Definition To enable an Emergency transmissionPressing the PTT bar to send the tones Emergency Operation Optional Receiving An Emergency CallHome Keypad Lock System Model OnlyPage GE-MARC Operation Sending a Message Sending a Special Call Sending a Preprogrammed Special Call In Conference Call Sending a Manually Entered Individual Call Sending a Manually Entered Interconnect Call Page Storing Individual And Interconnect Numbers Page Number will be displayed GE-MARC Special Call Flowchart Direct Mode Wide Area System ScanReceiving a Message Sending a Message Sending a Manually Entered Interconnect Call Add/Delete ChannelsScan must be disabled to add a channel to the scan list To delete Channels from the scan listThis page intentionally left blank Conventional Mode Operation Sending a Message After all the digits have been keyed in, release the PTT bar Page Frequency Band OPERATOR’S Name Emergency Group System System Number Name TRK/CNV GRP/CHN GRP/CHN USE Warranty Emergency Numbers