Lincoln Electric IM528-B manual Ranger 10 and Ranger 300 D Installation

INSTALLATION

Ranger 10 and Ranger 300 D Installation

Table 4 lists the required and optional equipment for installing and operating the TIG Module with a Ranger 10 or Ranger 300 D.

Refer to Figure 4 for the TIG Module/Ranger 10 connection diagram and to Figure 4A for the TIG Module/Ranger 300 D connection diagram. Make sure all connections are tight before proceeding.

RANGER 10 / RANGER 300 D AND THE TIG MODULE

REQUIRED EQUIPMENT

Control	Contactor	Work and	TIG	Work	Shielding Gas,	Arc Start
Cable	Kit	Electrode	Torch	Lead	Regulator,	Switch
		Leads from			Flowmeter	- OR -
		Ranger 10 to				Amptrol
		TIG Module
K936-3	K938-1	User Supplied;	User	User Supplied;	User	See
9-pin to	Field	Length as	Supplied	Length as	Supplied	Optional
6-pin	Installed	Req’d. Cable		Req’d. Cable		Equipment
plus		Sized to Match		Sized to Match		Below
115V Plug		Current and		Current and
		Duty Cycle		Duty Cycle

RANGER 10 / RANGER 300 D AND THE TIG MODULE

OPTIONAL EQUIPMENT

Control	Water	Arc Start	Hand	Foot	Docking
Cable	Valve	Switch	Amptrol	Amptrol	Kit
Extension
K937 - [ ]	K844-1	K814	K963	K870	K939-1
Extension					Mounts to
9-pin to 9-pin					Ranger 10
					Roof

TABLE 4

TIG MODULE – 11 –