Lincoln Electric IM528-B manual Rear Connections

OPERATION

	REAR CONNECTIONS
7	1	2

WARNING

ELECTRODE

V

WORK

6 5 4 3

FIGURE 8

1WARNING INFORMATION - Important information regarding the safe installation, operation, and servicing of the TIG Module.

2INPUT RECEPTACLE - For connecting the Control Cable from the power source. This receptacle contains the following circuits: Input power, power source contactor control (where applicable) and power source remote control (where applicable). This is a 9-pin receptacle.

3WATER VALVE FITTINGS (OPTIONAL) - Water valve inlet and outlet fittings, 5/8-18left-hand threads. For connection of cooling water to and from the TIG torch. Supplied as part of the optional K844-1 Water Valve Kit.

4POWER INPUT CONNECTIONS - Connections for the work (bottom) and electrode (top) cables from the Ranger power source. 1/2-13 threaded stud connections.

5POWER OUTPUT CONNECTIONS - Connections for the work lead (bottom) and TIG torch (top). 1/2- 13 threaded stud connections.

6GAS VALVE FITTINGS - Gas valve inlet and outlet fittings, 5/8-18 right hand threads. For connection of the shielding gas supply and the TIG torch gas fitting.

7ARC START SWITCH / AMPTROL RECEPTACLE - 6-socket receptacle for connecting an arc start switch or an Amptrol remote current control.

– 22 – TIG MODULE