Lincoln Electric IM528-B manual Installation of Field Installed Accessories

INSTALLATION

If using a water cooled torch with a water cooler, do not install the water valve. It will block the water flow, possibly damaging the pump. Magnum water coolers are an exception to this rule. Refer to the manufacturer’s instructions provided with the cooler.

INSTALLATION OF FIELD INSTALLED

ACCESSORIES

Installation of the K963 Hand Amptrol, K870 Foot Amptrol, and K814 Arc Start Switch is as follows:

Connect the 6-pin MS-type circular connector to the Remote Receptacle on the TIG Module. Secure with the threaded collar.

Installation of the K936-[ ] Input Cables and K937-[ ] Extension Cables is as follows:

Connect the 9-socket MS-type circular connector on the Input Cable to the Input Receptacle on the TIG Module. Secure with the threaded collar. If one or more K937-[ ] Extension Cables are used, connect them between the TIG Module and the K936-[ ] Input cable.

Installation instructions for the K938-1 Contactor Kit, K844-1 Water Valve Kit and the K939-1 Docking Kit are included with those kits.

– 4 – TIG MODULE