Function and Control
1ON/OFF :
Press this button to start the unit operation .Press this button again to stop the unit operation.
2MODE :
Each time you press this button,a mode is selected in a sequence that goes from AUTO, COOL,DRY, FAN,and HEAT *, as the following:
AUTO 
COOL 
DRY 
FAN 
HEAT *
*Note:Only for modelswith heating function.
After energization, AUTO mode is defaulted. In AUTO mode, the set temperature will not be displayed on the LCD, and the unit will automatically select the suitable operation mode in accordance with the room temperature to make indoor room comfortable.
3 + :
Press this button to increase set temperature.Holding down button above 2 seconds rapidly increases set temperature. In AUTO mode, set temperature is not adjustable.
4
Press this button to decrease set temperature. .Holding down button above 2 seconds rapidly decreases set temperature. In AUTO mode, set temperature is not adjustable.
5FAN :
Every press of FAN button changes the fan speed in the following order:
Auto
Low speed | Medium speed | High speed |
6
:
Everypressof thebutton changes the swing anglein the follow order:
OFF
This remote controller is universal . If any command
, 
or 
is sent out, the unit will carry out the command as 
indicates the guide louver swings as:
23